Many evenings were spent de-lugging the frame, and removing the centre-post to clear the newer (Evolution) Sportster engine – I had to bend a new S-shaped centre-post, and make a huge tombstone-shaped mounting plate for the rear of the engine. Graham at Coba Valley Cycles made me a head-steady (and also did a few other choice bits, too), but the real challenge was getting the frame so low – I placed a jack between the rails, and lowered it as close as possible to the frame, then cut away the frame.
The aim was to get a sunken look on the bottom rail and, once done, I made new front engine mountings and brackets to hold it in place, and to get the engine in line I had to move it 25mm to accommodate the new larger (180-section) back tyre on the V-Rod solid wheel I’d scored (and adapted for chain final drive). All of the design was done by me, with the exception of the chain final drive conversion. Graham (Coba Valley) designed and fabricated it so that I could get a solid wheel to work with a chain-driven engine.
هذه القصة مأخوذة من طبعة October 2020 من Back Street Heroes.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك ? تسجيل الدخول
هذه القصة مأخوذة من طبعة October 2020 من Back Street Heroes.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك? تسجيل الدخول
THE SLED
I’M A SEMI-PRO SHED BUILDER, WHO BUILDS UNDER THE NAME DIRTY DICK’S… I SAY ‘SEMIPRO’ BECAUSE I’VE ONLY, AT THE TIME OF WRITING, SOLD TWO BIKES (AND, USUALLY, I GET PAID IN BEER FOR ANY OTHER WORK I DO).
THE CHIEF
I BOUGHT MY ENFIELD, A 2001 350 BULLET, IN SHROPSHIRE IN JUNE 2019, WITH JUST 11,000 MILES ON THE CLOCK. IT WAS IN TRIALS TRIM, BUT I ALREADY HAD IN MY HEAD WHAT I WANTED TO DO WITH IT – MAKE IT INTO A ‘50S-STYLE CUSTOM, BASED LOOSELY AROUND AN INDIAN SCOUT THAT I’D SEEN PICTURES OF.
MADE O'GUBBINS
OVER THE LAST YEAR OR SO, MANY OF US’VE HAD TO FOREGO THE JOY OF SEARCHING FOR PARTS AT AUTO-JUMBLES, SHOWS AND BREAKER’S YARDS, RELYING ON EITHER THE HIT-AND-MISS OF INTERNET AUCTION SITES, OR TURNING TO OUR OWN STOCK OF PARTS, WHEN LOOKING AT BUILDING OR MODIFYING A BIKE.
BUDGET BOBBER
PEOPLE ALWAYS SAY CUSTOM BIKES’RE EXPENSIVE, THAT ONLY THE RICH CAN HAVE ‘EM, BUT IF YOU REALLY WANT ONE THERE’S ALWAYS A WAY…
LEAF IT OUT
THE SUZUKI LS650 IS PERHAPS BEST KNOWN FOR HAVING ONE OF THE LEAST SUITED AND MOST RANDOM MODEL NAMES IN MOTORCYCLING HISTORY – THE SAVAGE.
SIZE O
I DECIDED I NEEDED A BIKE FOR MYSELF AS A KEEPER (RATHER THAN THE USUAL BUILD IT, SELL IT, FUND THE NEXT ONE), BUT TIME AND FUNDS WERE GOING TO GET TIGHT. I WANTED A ‘60S/’70S-STYLE HARDTAIL WITH A DECENT-SIZED MOTOR, SINGLE OR TWIN, AND SOMETHING I DIDN’T HAVE TO DO ANY FRAME MODIFICATIONS TO.
LITTLE VICTORIES
SOME FOLK SAY WORK’S A NECESSARY EVIL, OTHERS MAKE THE MOST OF THEIR SITUATION. A GOOD FRIEND ONCE SAID TO ME THAT IT’S THE LITTLE VICTORIES THAT COUNT WHEN AT WORK, USING THEIR MACHINERY TO MAKE BIKE PARTS, BLAGGING FREE STATIONARY, OR JUST HAVING A POO ON THEIR TIME…
BACK TO THE EIGHTIES!
AFTER THE STYLISTIC EXCESSES OF THE 1970S, THE 1980S SAW A KIND OF DIRECTION CHANGE IN CUSTOM BIKE BUILDING – ONE WHICH RESULTED IN NO SMALL PART FROM THE ABUNDANCE OF FAST, RELIABLE FOUR-CYLINDER MOTORCYCLES FROM THE LAND OF THE RISING SUN.
APPLE
MY GOAL WAS TO CREATE A CAFÉ RACER WITH STYLING FROM THE FIFTIES – ROUND CURVES THAT’D MAKE IT POP.
3 DIRT DIGGERS
OVER THE LAST FEW YEARS DIRT DIGGERS, HELD AT THE EDDIE WRIGHT SPEEDWAY STADIUM IN SCUNTHORPE, HAS BECOME THE NUMBER ONE, ALL-COMERS-WELCOME BIKE RACE IN THE UK.
