For the first-time RC modeler, setting up your airplane is fun all by itself. But the real excitement begins at the flying field. The basics for success are your properly assembled airplane, a fully charged radio and flight battery, and a nice calm day at the flying field.
Here are 10 tips to help you get started.
1. GET AN INSTRUCTOR
It’s best to partner up with an experienced modeler who can teach you to fly. Together, you both can set some flight goals so that you can build on what you learn on previous flights. A good plan includes learning how to: taxi your model and takeoff, fly at a constant altitude, execute left and right turns, fly at lower airspeeds, and recover from stalls.
Always concentrate on keeping your model under control and adjust for wind conditions.
2. GET CONNECTED
A buddy-box training system is very helpful. Some use a cable to connect the student’s and instructor’s transmitters and some are wireless. It allows the instructor to take over control (usually with a spring-loaded switch) if the student gets in trouble.
3. TAXI-TESTS
A good way to get comfortable with your model is to slowly taxi it around so you get a feel for how it reacts to control inputs. Taxiing upwind while steering with the rudder is more effective. With a taildragger, apply a little up-elevator to help keep the tailwheel on the ground. With a model that has tricycle landing gear, a slight bit of down-elevator will help keep the nose-wheel down for positive steering control. Taxi training also helps you learn about steering/control reversal.
هذه القصة مأخوذة من طبعة January 2022 من Model Airplane News.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك ? تسجيل الدخول
هذه القصة مأخوذة من طبعة January 2022 من Model Airplane News.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك? تسجيل الدخول
Legend Hobby / Seagull Models - Cessna Grand Caravan 208
The Cessna Grand Caravan 208 is a legend in aviation circles. A single engine utility aircraft that punches up with capabilities that rival many twin engine aircraft in its class. Its seemingly simple configuration belies its near extreme utility.
PROPER CG LOCATION FOR AEROBATICS
If you are getting into aerobatics and are starting to perform more advanced maneuvers, it is time to discuss ways you can not only become a better pilot, but how you can also improve the flight characteristics of your airplanes.
Legend Hobby 13-Foot L-19 Bird Dog/ Cessna O-1
This famous multi-mission single engine observation aircraft served from 1950-1974. From calling out target locations to providing intel/recon information, the Bird Dog was a valued asset in both the Korean War and Vietnam.
EARN YOUR WINGS
10 Tips for First-Flight Success
Old School Model Works Fifty Six
The Fifty Six takes its design cues from the original .09- to .15-size Carl Goldberg Falcon 56 of the 1960s. Reworked to incorporate modern, lasercut techniques to make kit building better than ever.
FLYING TWINS Multi-engine warbirds made easy
Let’s face it, there’s just something extra special about twin-engine RC aircraft. Most modelers stop what they’re doing when a twin fires up on the flightline.
HOW TO BALANCE PROPELLERS
Four easy steps to increase performance and reduce vibration
PRODUCT REVIEW: RC PLANE STANDS BENCHTOP MODEL
I’m a sucker for shop stuff. I buy tools I will probably never use just because they are cool, or I might need to use them someday. When Glen from RC Plane Stands reached out about a review, however, I knew as soon as I browsed their website that I would be receiving something I would use a lot, maybe even daily.
SPIRIT OF RHINEBECK AWARD WINNER
A close up of Norman Malinowski’s 1/3-scale Albatros
CENTER OF GRAVITY BASICS
The secret to a plane that flies well
