The self-propelled scissor lift forms the bedrock of most aerial lift rental fleets, representing almost two-thirds of all self-propelled aerial work platforms currently in operation. The split between boom and scissor lifts has not changed much over the past 10 years, although the survey for the latest IPAF Global Powered Access Rental Market Reports indicates that there has been a slight shift towards boom lifts in the US and Europe fleets. The reports – which are well worth a look if the lift rental market interests you – indicate that scissor lifts now represent 61 per cent of the units in rental fleets across 10 European countries, the USA and China, which equates to 610,000 units in daily operation. The actual number, taking in end users and those not surveyed, is considerably higher.
If you then look at power sources, the difference between booms and scissors is stark. Around 90 percent of all scissor lifts in Europe are battery-powered, compared to around 40 per cent of boom lifts. Although this is changing as a more end-users move towards all-electric or hybrid booms for their projects. The preponderance of electric power for scissor lifts has little to do with the latest trend towards emission-free construction equipment – although that is one of the driving forces towards the adoption of big electric Rough Terrains. The majority of scissor lifts have always been battery-powered due to the fact that slab electric scissor lifts need to be compact enough to pass through doors and ‘ride’ elevators etc… which leaves little room for an engine and given that they are used indoors for much of the time, diesel noise and emissions are undesirable.
The Rough Terrain market
هذه القصة مأخوذة من طبعة December/January 2021 من Cranes & Access.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك ? تسجيل الدخول
هذه القصة مأخوذة من طبعة December/January 2021 من Cranes & Access.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك? تسجيل الدخول
The Changing Face Of The Scissor Lift Market
The majority of self-propelled scissor lifts have been electric powered since the market began to take off in the late 1970s, gathering pace in the mid 1980s. With almost 90 percent of all scissor lifts already battery powered we take a look at the remaining 10 to 15 percent of the market that remains diesel powered – mostly full size Rough Terrain models. This, along with a look at some of the latest new product launches in the rest of the scissor lift market.
Wind safety developments
A serious wind farm accident in 2008 led to a decade long process of safety improvements in the sector and offers a casebook example of how to build an understanding of safety between all those involved. Will North spoke to two of those leading the efforts, Klaus Meissner and Ton Klijn, who explain the resources available to ensure safe lifting on wind farms.
Rising winds
As a new generation of larger, higher, wind turbines become commonplace around the world, wind farm developers will need to look at employing larger lattice and telescopic crawler cranes to install them. Will north reports.
Edilgru MH 1000-30/32
Edilgru is an Italian manufacturer of self-erecting tower cranes. CGM Models of Italy has produced this 1:50 scale model which is substantially made of high-quality plastic, rather than being diecast. It comes in an Edilgru branded box, but there are no instructions included, which is a pity as they would be helpful.
Bringing Battersea Back To Life
London’s iconic art deco style coal-fired Battersea Power Station was constructed in various stages between 1929 and the mid-1950s. By 1983 however the entire site was decommissioned to be left empty and decaying on the south bank of the River Thames until 2013 when work was approved to begin a long-term restoration and transformation project set to cost £9 billion.
The higher hundreds
In the second of a two-part report, Will North looks at All Terrain cranes between 130 and 180 tonnes. While some models in this class target taxi crane work, it also marks the point where five-axle carriers become standard with most models designed for project work.
Spiders gaining traction
The results from our survey of the tree care sector in last month’s issue of cranes & Access highlighted how spider lifts are the platform of choice for arborists. In the following pages we take a look at the latest spider lift products and features on the market to see why they are proving so popular. We also speak with CMC's UK distributor Tracked Spider Sales and UK rental company Spiderlift.
Unconventional power
Conventional fuels may be the energy source of yesterday, and renewables the innovation of the present, but tomorrow’s fuel could well be fusion power. The name of ITeR, originally the International Thermonuclear Experimental Reactor, puns on the latin ‘The Way'. The project is supported by the european union, India, Japan, Korea, Russia and the united States. The global joint venture partners clearly believe fusion power is the way forward.
XCMG XGC220T
The XCMG XGC220T is a telescopic crawler crane with a capacity of 220 tonnes. This model by Yagao comes in an XCMG branded box and includes an instruction sheet printed in Chinese and English.
Luke Reddish - CPA Lifting Technician of the Year
This year’s CPA Stars of the Future ‘Lifting Technician of the Year’ award was won by Luke Reddish, 28, of Wolffkran - one of the first crane companies to adopt the new Lifting Technician Trailblazer Apprenticeship. Wolffkran’s Samuel Slocombe was also highly commended.
