Considerations Concerning RT Measurement
audioXpress|October 2022
In this article, our acoustics expert explains the history behind the reverberation time (RT) measurement and its importance. He then shares his preferred procedure for measuring RT.
Richard Honeycutt
Considerations Concerning RT Measurement

When an acoustician-or a musician-visits an unfamiliar room, (s)he often claps once or a few times to get a sense of the acoustics of the room.

An experienced listener can tell several things about the room from the sound of the clap including:

• The approximate volume of the room (large, medium, or small, but not actual cubic feet or cubic meters)

• The presence or absence of slap or flutter echoes caused by unwanted reflections

• The "liveliness" or "deadness" of the room, even (for a truly astute listener) the approximate reverberation time (RT)

Although we know that the effects of echoes and reverberation have been known since antiquity, we have no way of knowing at just what point in history people began using hand claps to assess their predominance in rooms.

We do know that Professor Wallace Clement Sabine developed the measurement and analysis of RT into a science during the closing years of the 19th century. His study of reverberation culminated in the "Sabine equation": 

where S₁ = the surface area of a particular section of the surfaces in the room, and a₁ = the acoustical absorption coefficient of that particular section.

As can be seen from this equation, Sabine's theory states that the RT of any room can be predicted from a knowledge of the room's volume and total acoustical absorption. In order for the prediction to be accurate, two conditions must be met:

(1) The sound in the room must be diffuse, meaning that at any point in the room there is equal probability of reverberant sound arriving from any direction.

(2) The acoustical absorption must be evenly distributed among all surfaces: wall, floor, and ceiling.

Given these conditions, the RT is the same at any point in the room.

RT Variation within a Room

هذه القصة مأخوذة من طبعة October 2022 من audioXpress.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.

هذه القصة مأخوذة من طبعة October 2022 من audioXpress.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.

المزيد من القصص من AUDIOXPRESS مشاهدة الكل
Perspectives on Automotive Sound Design - In the Era of Electric Vehicles
audioXpress

Perspectives on Automotive Sound Design - In the Era of Electric Vehicles

From combustion engine vehicles to fully electric vehicles, and from sound systems in the car to sound design and synthesis for the car itself, everything is changing in the automotive industry. This conversation with two members of the DSP Concepts automotive team with vast experience in the field, John Whitecar, VP of Product Management, and Steve Ernst, Head of Business Development, offers valuable insights on how things are evolving.

time-read
10+ mins  |
June 2023
Audioscenic: From Vision to Product
audioXpress

Audioscenic: From Vision to Product

Audioscenic is an innovative 3D audio beamforming technology company spun off from the University of Southampton. It is a remarkable example of perseverance, from early development to the first commercial implementation, which audioXpress considered Best of Show at CES 2023. This article shares the story so far, as Audioscenic continues its groundbreaking journey exploring consumer applications for its forward-thinking approach to spatial audio.

time-read
8 mins  |
June 2023
The Changing Audio-Ecosystem in Electric Vehicles
audioXpress

The Changing Audio-Ecosystem in Electric Vehicles

The rapid shift to plug-in hybrid and full-battery electric vehicles is having a significant and long-lasting impact on how audio systems are integrated into cars. While some noises are much more prominent due to the absence of the familiar engine noise, the transition offers exciting possibilities for sound systems, passenger entertainment, and enhancing the overall automotive experience.

time-read
10+ mins  |
June 2023
A (Z)OTL with 300Bs: Part 1-The Makeover
audioXpress

A (Z)OTL with 300Bs: Part 1-The Makeover

Rebuilding an amplifier for reasons of better reliability, better aesthetics, or bringing it up to the latest standard can be very rewarding. And if it is a classical, technological grandstand, even more so. Thomas Perazella embarked on such an adventure with a famous David Berning ZOTL amplifier. In Part 1 of this article, Tom presents the amplifier and discusses its unique circuitry. In Part 2, he will proceed to dismantle and rebuild the amp for the new owner and place it in a new chassis

time-read
10+ mins  |
May 2023
The Hypex NCORE NCx500 Amplifier Module
audioXpress

The Hypex NCORE NCx500 Amplifier Module

NCORE (NC) amplifier modules are the flagship product from Dutch manufacturer Hypex Electronics and its success among the high-end audio brands is well documented. In 2022, Hypex announced the introduction of its improved NCOREX technology, starting with the NCx500 OEM module, which audioXpress received for review

time-read
10+ mins  |
May 2023
Monoblock Power Amplifier with Precision Bias Control
audioXpress

Monoblock Power Amplifier with Precision Bias Control

In Part 2, Bruce Gillingham discusses the remainder of the MB1's circuitry, its mechanical design, and its performance measurements

time-read
10+ mins  |
May 2023
A Trip Down Memory Lane
audioXpress

A Trip Down Memory Lane

The history of tube application began with radio receivers, the telephone system, and cinema sound systems. Later, tubes began to be used in home stereo systems, and in amplifiers for electric guitars. Today, the primary markets for tubes are high-end stereo and musical instrument amplifiers. In this article Richard Honeycutt remembers his first contact with \"starter\" guitar amps as a teenager, progressing throughout his days as a semi-pro musician

time-read
5 mins  |
May 2023
The Vanderveen Trans PP80 Valve Amplifier
audioXpress

The Vanderveen Trans PP80 Valve Amplifier

This new push-pull (PP) valve amplifier, featuring the Trans technique, delivers 80W power, refined resolution, valve-sound envelopment, and low distortion plus good speaker damping. And... the amp is simple to construct

time-read
10+ mins  |
May 2023
Accuracy in LTspice Modeling
audioXpress

Accuracy in LTspice Modeling

Sometimes we need to consider the human factor when using circuit design simulation tools. In this article, our hollow-state expert details an error that occurred in a past article, which is now being corrected.

time-read
4 mins  |
March 2023
Transitioning Audio Tests from R&D to the Production Line
audioXpress

Transitioning Audio Tests from R&D to the Production Line

Production line audio testing poses many challenges such as noisy environments, harsh operating conditions, high throughput, relative limits, and more. In this article, Steve Temme shares his observations and outlines the main considerations to ensure a successful operation.

time-read
10+ mins  |
March 2023