If you’ve been following our Yamaha CS3C restoration series then you’ll be painfully aware that the 200cc street scrambler had led a hard life, despite having less than 7000 miles on its odometer.
Given the state of peripheral items, along with the scuffed tailpipes, it’s fair to say it’s been well abused. When we found a clutch basket that looked as if it had been attacked by metal-eating rodents this pretty much confirmed the bike had spent a lot of its life on the back wheel. The spare clutch basket assembly miraculously produced by Dave J saved the day… well, almost. We subsequently spotted that the aluminium basket appeared to have far too much rotational free play in relation to the primary drive gear on to which it’s affixed.
Diese Geschichte stammt aus der February 2020-Ausgabe von Classic Motorcycle Mechanics.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent ? Anmelden
Diese Geschichte stammt aus der February 2020-Ausgabe von Classic Motorcycle Mechanics.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent? Anmelden
Honda VFR750R - RC30
If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…
Mountain tension!
Award-winning motorcycle engineer!
Fazer set to STUN!
What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.
Project Suzuki TS400 Part 8 Loom with a view!
We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?
Project Yamaha TX750 Part 12 A question of balance…
Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?
Splitting links
Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.
STAVROS: PRINCE OF PRANKSTERS!
It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.
Metal magic!
Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .
