Motor-Head!
Classic Motorcycle Mechanics|August 2018

Mark is almost there with the CB750 – but he does try to do things on the cheap! It’s why we love ’im…

Mark Haycock
Motor-Head!

The K2 engine was nearly ready to go, but there was just one last check and that was to the ignition system.

The contact breaker and auto advance unit are mounted at the end of the crankshaft under a chrome plated cover which I must admit had seen better days (Photo 1). This appears to be another example of how these bikes are knocked about during transporting from the USA, which is quite annoying as this is not an especially cheap part. This is what it looked like after being beaten out to greatly improve the appearance.

After taking off the points mounting plate, I checked the points and decided that they would best be replaced (Photo 2), and here I was faced with a choice: genuine Honda or pattern parts? To help you make your mind up, all I need to do is to tell you that the Japanese-made Daiichi pattern parts are available for less than a tenner for each set (the CB750 has a separate set for each pair of cylinders) but the genuine ones – which are still available – are £33 per set. So that is a difference of £46 for the pair and there seems to be no significant difference between the two types. So it is not too hard to choose – though later on in this series we will see that things are not quite as straightforward as they seem.

You should always check the capacitors, especially in this case considering they are now getting on for 50 years old and (in Photo 3) I am checking one with a multimeter which can read capacitance. I am getting the reading 244 picofarads which is usually expressed in automotive circles as 0.24 microfarads and this is correct for this application. The other was similar. Strictly speaking, the tests should include putting a high voltage across the terminals to check the dielectric but as I do not have a suitable instrument I had to assume they were okay.

Diese Geschichte stammt aus der August 2018-Ausgabe von Classic Motorcycle Mechanics.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

Diese Geschichte stammt aus der August 2018-Ausgabe von Classic Motorcycle Mechanics.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

WEITERE ARTIKEL AUS CLASSIC MOTORCYCLE MECHANICSAlle anzeigen
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 Minuten  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 Minuten  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 Minuten  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 Minuten  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 Minuten  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 Minuten  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 Minuten  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 Minuten  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 Minuten  |
July 2021