Project Yamaha CS3C Part 7 - Going Cranky!
Classic Motorcycle Mechanics|February 2019

Scoop and his mates carry out various surgeries to the CS3C’s heart. Nurse, scalpel!

Steve Cooper
Project Yamaha CS3C Part 7 - Going Cranky!

This instalment’s missive is all about the engine and the faults, the issues and the subsequent rebuild.

Those readers who haven’t yet lost the will to live may recall the chaos that was the top-end of the original motor and the spare pair of cylinders. There was a hope that they’d only need a light hone, remember? And then we found out that the wretched things were considerably worn. So worn in fact, that they needed to go out to maximum oversize at 1.00mm.

Well, I’d like to report back to say that everything went according to plan but, of course, anything involving a ‘Scoop Scoot’ generally throws its owner a curve ball.

And some things don’t change: the barrels presented Rob Pemberton of SPA Motorcycles a challenge. They appear to have come from a similarly ill-treated CS3 that, amazingly, has seen even more abuse than mine. Apparently, the suspicion is that the crank that partnered my now re-bored barrels must have been spectacularly worn with con-rods that were almost flapping from side to side. Huge wear to the thrust washers and/or big-ends must have seen pistons floating out sideways. This presented its own unique challenge and meant Rob had to re-bore five-thou off centre. According to the Guru of the Gauges: “Yes, I’ve seen similar before but it’s all in a day’s work for us.” Quite why he tolerates me and my bikes I’ve yet to fully grasp!

Diese Geschichte stammt aus der February 2019-Ausgabe von Classic Motorcycle Mechanics.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

Diese Geschichte stammt aus der February 2019-Ausgabe von Classic Motorcycle Mechanics.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

WEITERE ARTIKEL AUS CLASSIC MOTORCYCLE MECHANICSAlle anzeigen
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 Minuten  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 Minuten  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 Minuten  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 Minuten  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 Minuten  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 Minuten  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 Minuten  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 Minuten  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 Minuten  |
July 2021