Project Yamaha TZR250 3MA part 2 Four-Into-One!
Classic Motorcycle Mechanics|May 2020
Jeff has the lucky job of turning four 3MA motors into one screaming two-stroke… he’s quite excited!
Jeff Ware
Project Yamaha TZR250 3MA part 2 Four-Into-One!

G’day! Things are progressing well with the TZR250 3MA. Last update I ran you through the initial inspection and strip-down of the engine.

Darren, the owner, had managed to source three spare motors, so we were all set to get the engine work underway. Wanting to keep the original cases, we sent those away to be repaired (a con-rod had got up for a late-night stretch and left the fridge door open) so while we waited for those, we sorted the rolling chassis so Darren could take it away and make it pretty again…

This bike has been well maintained and on inspection no chassis bearings needed replacing, so that was good news. Tim, my offsider, got to work servicing the main pivot points while I sorted the forks.

The bike was stripped both ends and I quickly disassembled the forks so Darren could get the bottoms powder-coated grey. While that was happening, we cleaned and re-packed the steering-head, swingarm pivot point and all of the suspension linkage bearings and bushes. We then greased the wheels bearings and wire wheeled, then lubricated the axles. The rear shock also got stripped, cleaned, re-assembled and greased rose joints, plus all pivot points and linkages on the chassis were given the same treatment.

The fork lowers arrived looking mint, so I put those back together with new seals and slotted those back in the bike. The YZR250 look-a-like was looking forking mint by now (ahem) and with the wheels back in, it was time to hand the bike back to Darren, who is detailing it and taking care of the cosmetic side of things.

Diese Geschichte stammt aus der May 2020-Ausgabe von Classic Motorcycle Mechanics.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

Diese Geschichte stammt aus der May 2020-Ausgabe von Classic Motorcycle Mechanics.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

WEITERE ARTIKEL AUS CLASSIC MOTORCYCLE MECHANICSAlle anzeigen
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 Minuten  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 Minuten  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 Minuten  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 Minuten  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 Minuten  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 Minuten  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 Minuten  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 Minuten  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 Minuten  |
July 2021