Q. I am an accomplished stick and MIG welder, and all of my autobody welding has been done with a torch or a MIG welder. I am restoring a ’38 Ford pickup and plan on butt-welding the sheet metal repairs with a TIG welder. I have an old Miller 330 transformer machine that I repaired, and I finally have the TIG function working well. I will be butt-welding 18-gauge panels to the existing 19-gauge body. I have been practicing butt-welding 18-gauge panels and have it dialed in pretty well. I watched your butt-weld panels at two of your workshops, and I have some questions. I get the best results at approximately 50 amps using a 1 ⁄16-inch tungsten with a #5 cup, after trying #4, #5, and #6 cups, with argon set at 20 CFH, and 5-second post flow. I have tried 0.040, 1 ⁄16-, and 3⁄32-inch tungsten, both thoriated and created. I have heard created doesn’t work on the old transformer machines, but it seems to work fine for me. I have a few of your DVDs, including the one on TIG Welding.
Diese Geschichte stammt aus der January 2010-Ausgabe von Classic Trucks.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent ? Anmelden
Diese Geschichte stammt aus der January 2010-Ausgabe von Classic Trucks.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent? Anmelden
WHEN ONE THING LEADS TO ANOTHER …
The Hollman “Family” Chevys
TOP PRIZE
Raybestos Commissioned This ’53 Chevy and Promptly Gave it Away
TAILGATE
Heavy Chevy
GOLDILOCKS' TRUCK
Careful Attention to Detail Make This Ford Just Right
INFERNO
Frank Dill’s ’52 Ford F-1 Packs a Big Horsepower Punch
Daring To Be Different
Oddball, Orphaned, and Overlooked Trucks
Professor Hammer's Metalworking Tips
Q. I have a Miller Multimatic 215 welder. In the TIG mode, I often weld 20-gauge sheet metal using 1 ⁄16 tungsten at 35 amps, using a 1 ⁄16 filler rod. I have the welding helmet turned as far down as it will go (shade 9) with a closeup lens, and a 100-watt light source close to the weld. I cannot see where I’m going with the weld.
Stealth Mode
David Zambon’s ’53F-100 is an Exercise in Subtlety
Extra Special
This Rare ’65 Chevy C10 Stageway Crew Cab Wears Some Corvette Details
Vintage Lines Powered By Modern Muscle
Modern Supercharged Performance in a ’50s Wrapper
