FOLLOWING on from last month’s column on how to fabricate a flat firewall, we now turn our attention to fabricating a pair of inner fenders to complete a silky-smooth engine bay. Again, this isn’t so much a ‘how to’ guide as it is a little insight into the thought process and metal fabrication required for a job like this.
STEP 01
The rod frames we fabricated for the firewall design last issue now come in handy as a guide to see where the new panels will sit. Some scrap 0.6mm steel sheet serves as a template to get a correct line on the bottom edge. Decent card coupled with masking tape also comes in handy for this sort of work.
STEP 02
A much-needed visit from the blaster sees things taken back to bare metal, making the bay much easier and a whole lot nicer to work on. Once blasted, everything is coated in Oxytech’s Easy Phos to prevent surface rust.
STEP 03
With all the necessary templates in hand, things can now be marked out onto a sheet of 1mm steel. The sheet is then cut out and rolled to give it the appropriate curve. This can either be done using a set of sheet-metal rollers, or by using the English wheel with a rubber band on the top wheel. The rubber band will ensure the sheet can only curve left and right, as opposed to the normal situation of left to right and front to back.
STEP 04
Diese Geschichte stammt aus der April 2020-Ausgabe von Street Machine Magazine.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent ? Anmelden
Diese Geschichte stammt aus der April 2020-Ausgabe von Street Machine Magazine.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent? Anmelden
CHALLENGE ACCEPTED
ARBY’S EFFORTS TO IMPROVE HIS VG VALIANT’S 60-FOOT TIMES YIELD PROMISING RESULTS IN THE RUN-UP TO STREET MACHINE DRAG CHALLENGE
ANIKA HODGES
THE CAR DROVE INTO OUR SHED AS A CREAM 202CI VC AND DROVE OUT AS A SILVER CAR WITH A 355 V8
STAGE FRIGHT
IT TOOK OWEN SCOTT MORE THAN 20 YEARS TO BUILD A TROPHY-WINING, 600HP EH HOLDEN UTE THAT WILL STAND THE TEST OF TIME
THE Ummmal SUSPECT
FORGET WHAT YOU THINK YOU KNOW ABOUT MINI-TRUCKS. THIS SUMMERNATS TOP 60 HILUX IS A PROPER STREET MACHINE
FULLY UTILISED
HARDWOOD ROD & CUSTOM TURNS DARREN ISON'S HAND-ME-DOWN HT INTO A SMOOTH OPERATOR
CHALLENGE ACCEPTED
ARBY’S EFFORTS TO IMPROVE HIS VG VALIANT’S 60-FOOT TIMES YIELD PROMISING RESULTS IN THE RUN-UP TO STREET MACHINE DRAG CHALLENGE
PEOPLE POWER
WE TAKE A LOOK BACK AT 36 YEARS OF THE MOST PRESTIGIOUS - AND MOST DEMOCRATICALLY AWARDED - HONOUR IN OUR SPORT: STREET MACHINE OF THE YEAR
OUT-AND-OUT MAYHEM
STREET MACHINE DRAG CHALLENGE IS ALREADY A ROLLICKING GOOD TIME, BUT WHAT CAR EVENT CAN'T BE MADE EVEN BETTER BY ADDING A BURNOUT COMP? INTRODUCING OUR INAUGURAL RODS OUT!
BAD TO THE BONE
THANKS TO HIS SON, ANDY, THE LATE MARIO COLALILLO’S 39 PLYMOUTH COUPE IS BACK ON THE ROAD AND STILL ONE OF THE BADDEST HOT RODS IN THE COUNTRY
THE CHALLENGE IS REAL
FROM TRACK DRAMAS TO SOARING TEMPERATURES, DRAG CHALLENGE 2024 THREW US SOME OF ITS TOUGHEST TESTS YET, BUT IT ALSO BROUGHT SOME OF THE QUICKEST TIMES THE EVENT HAS EVER SEEN
