Cast Away
Racecar Engineering|September 2017

There’s much more to casting high performance engine parts than simply pouring liquid metal into a mould – as Racecar discovered on a visit to Formula 1 supplier Grainger and Worrall

Gemma Hatton
Cast Away

In a Formula 1 engine during the combustion process the instantaneous gas temperature reaches 2600degC, which is half as hot as the sun’s surface, and the gas pressure forces are equivalent to four elephants acting on each of the pistons. Within a blink of an eye an F1 engine completes 200 ignitions, with 43 trillion calculations over a race distance. And it only takes one combustion error in 37 million to cause a terminal failure.

With these figures in mind we can maybe start to appreciate the phenomenal challenge facing motorsport engine manufacturers. ‘The shift towards small capacity turbocharged engines that we’ve seen in F1 and, are starting to see in other championships, results in the engine stresses and temperatures reaching new levels,’ explains Phil Ward, director of performance products at Grainger and Worrall, which is a world leader in manufacturing structural engine castings. ‘The increase in temperature is more of a challenge than the increase in stress, because the aluminium alloys within the engine experience a dramatic drop off in strength once a threshold temperature has been exceeded. A material that is perfectly strong at 160 to 180degC will behave like toffee above 250degC, so the alloys we used in the V8 era, which was only three years ago, are now no longer strong enough.’

Diese Geschichte stammt aus der September 2017-Ausgabe von Racecar Engineering.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

Diese Geschichte stammt aus der September 2017-Ausgabe von Racecar Engineering.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

WEITERE ARTIKEL AUS RACECAR ENGINEERINGAlle anzeigen
Racecar Engineering

Talk the torque

More thoughts on in-wheel motors and their effects on twisting force

time-read
6 Minuten  |
December 2021
Racecar Engineering

Rolling about

An explanation of the limitations of a previous load transfer article, bringing jacking forces into the mix

time-read
5 Minuten  |
December 2021
Racecar Engineering

F1 breaks schedule records

The FIA has confirmed no fewer than 23 races on the 2022 Formula 1 World Championship schedule, the highest number of grands prix ever to be held in a single season, and that has led to criticism from some teams that will be on the road for eight months.

time-read
1 min  |
December 2021
Under pressure
Racecar Engineering

Under pressure

Toyota may have finished first and second at Le Mans this year, but the effort required to overcome a fuel delivery problem and finish with both cars was Herculean

time-read
10+ Minuten  |
December 2021
Racecar Engineering

Physics at work

Dutch company, Intrax, offers Racecar Engineering an insight into the technologies it employs to optimise its suspension products

time-read
4 Minuten  |
December 2021
Racecar Engineering

Williams' 2030 ambition

Williams Racing has committed to becoming climate positive by 2030 as part of an all-new sustainability strategy.

time-read
1 min  |
December 2021
Racecar Engineering

Diff'rent strokes

Racecar looks at the different types of mechanical differential, their benefits and limitations

time-read
10+ Minuten  |
December 2021
Racecar Engineering

Das Boot

A curious Twitter exchange fired up a unique, hydrogen-powered, cross-country project that will contest the Baja 1000 in November 2022

time-read
8 Minuten  |
December 2021
Air born
Racecar Engineering

Air born

Every racecar engineer's dream is a blank sheet of paper design. When Hoonigan and Subaru approached Vermont Sportscars about building the next generation of Gymkhana racer, that's just what the company was given

time-read
8 Minuten  |
December 2021
Remote control
Racecar Engineering

Remote control

Called variously ‘virtual garages’, ‘mission control’ or ‘race support rooms’ is the future of race engineering sitting in the warm back at HQ?

time-read
10+ Minuten  |
December 2021