Let's take a look at how using WEST SYSTEM Epoxy can improve the holding power of a fastener in wood to give you fewer troubles on the water.
Saturating the Wood
Saturating the wood with epoxy is the simplest way to improve your fastener's holding power. You start by drilling a standard pilot hole, just as you would have to do even if you were not using epoxy. Using an 807 Syringe, fill the hole to the top with your chosen 105 Epoxy Resin and 200 series hardener combination. Allow the epoxy to saturate the wood. For 206 Slow Hardener at room temperature, I typically wait about 20 minutes. Then coat your fastener threads with epoxy and screw your fastener in by hand.
In warmer weather, the epoxy will cure faster, so do not wait too long. In cooler weather (40°F-60°F), use 205 Fast Hardener so it will cure in the cooler environment.
Saturating the wood is a very simple method to get some added moisture resistance and additional holding power without any additional drilling. This makes it a great technique for quickly replacing existing hardware. When the hole is drilled into a horizontal surface, this method works very well, but if you are coating a hole in a vertical surface, it can be tricky. Use a piece of packing tape or duct tape over the opening to prevent the epoxy from running out of the hole.
Oversizing the Hole
You can further improve the load-carrying capability of the fastener by increasing the amount of epoxy that surrounds the fastener. This takes advantage of the fact that WEST SYSTEM Epoxy has much higher density and strength than the wood fiber itself.
Diese Geschichte stammt aus der Winter 2023-Ausgabe von Sailing World.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent ? Anmelden
Diese Geschichte stammt aus der Winter 2023-Ausgabe von Sailing World.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent? Anmelden
Tips for More Successful Epoxy Projects
That have nothing to do with epoxy mixing or application techniques
Auxiliary Rear Station Build
From past fishing experiences, I've learned that quick changes in speed and direction are often required when retrieving a hooked fish.
TARGETED PERFORMERS
Defending their title at the 420 Youth Worlds in July, Freddie Parkin and Asher Beck were on a roll-until they weren't.
BALANCE ON THE PINNACLE
The path to gender equity in the Olympics has been a long and twisted one, but when the sailors assemble in Marseille next year, we'll finally see what's been a long time coming.
SIMPLE STEPS TO CONSISTENT SPEED
Boatspeed is the magic ingredient for winning races because we can get away with bad decisions if we are fast, but we can't make good choices if we're slow.
THREE-DIMENSIONAL JIB-LEAD ADJUSTMENTS
Floating jib leads give trimmers more dynamic control of the headsail profile.
BETTER TOGETHER
Success over three decades comes down to making it meaningful.
JUSTINE THE MACHINE
This self-effacing Swiss sailor has-in her quiet and understated way become one of the stars of offshore ocean racing in recent years, whether as part of a winning crew in The Ocean Race or building her credentials as a top-class solo racer.
THE MULTITASKING MULTIHULL MOM
Competing in Olympic sailing's most challenging discipline is one thing, but doing so with a tyke in tow takes the campaign hustle to a higher level.
CONNECTED COAST TO COAST
From sunny St. Pete to historic Marblehead, the 34th edition of the Regatta Series linked sailors and friends across the country, with a few new twists.
