Turn a Natural Edged Bowl
Popular Woodworking|August 2024 - Issue 279
Turning a live edge bowl is the perfect way to showcase a special piece of wood, such as this Burr Elm.
Jimmy Clewes
Turn a Natural Edged Bowl

Turning a live-edge piece of wood while keeping the natural edge and bark intact can be tricky. But, with careful planning and cuts, you can be left with a stunning piece.

Prep & Mount

To mount the blank, I prefer to drill a 1" hole into the top of the piece with a Forstner bit and use a 4-prong drive, driven in with a mallet. This is relatively safe as the 4 prongs are in a hole in solid wood.

I mark the center of the base to locate the revolving center. (Note: I would advise against using a center directly in the bark of any natural edge. If the bark loosens or gives when turning, the piece could come off the lathe). The tailstock and revolving center are used to support the bowl blank between centers. Be sure to avoid placing the blank between the centers and forcing the 4 prongs into the wood with the tailstock. This could result in damage to the bearings in the revolving center and headstock.

True Up & Get Started

When the piece is mounted in the lathe, I like to true up the blank using a push cut with an Irish grind bowl gouge. This particular grind has several names: Irish grind, Celtric grind, Ellsworth Grind, and Swept-back wing grind. They all basically have the wings swept back to varying degrees.

In order to get a smooth surface after the cut, make sure that the bevel is parallel to the cut you are making and the bevel is floating on the surface behind the cut. Photo 3 shows the appropriate tool position.

1-2 On an uneven surface, drilling a hole in the blank and driving in a prong drive is a secure way to hold the blank.

If the surface is not smooth after the cut, more than likley the bel is not rubbing. Even a hair will make a difference.

3 True up the outside of the blank using a push cut.

4 Remove some excess weight by starting to shape the bottom.

5 A draw cut removes a lot of material quickly, but is not a clean cut.

Diese Geschichte stammt aus der August 2024 - Issue 279-Ausgabe von Popular Woodworking.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

Diese Geschichte stammt aus der August 2024 - Issue 279-Ausgabe von Popular Woodworking.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

WEITERE ARTIKEL AUS POPULAR WOODWORKINGAlle anzeigen
Bosch Job Site Table Saw
Popular Woodworking

Bosch Job Site Table Saw

While many woodworkers dream of the largest cabinet saw they can get their hands on, reality often dictates a different path.

time-read
1 min  |
October 2024 - Issue 280
MIDSIZE ROUTER MELEE
Popular Woodworking

MIDSIZE ROUTER MELEE

Routers love them or hate them, there are an overwhelming amount of options available. Here's the breakdown on how this midsized lot performs.

time-read
3 Minuten  |
October 2024 - Issue 280
Glancy's No 1 Oil
Popular Woodworking

Glancy's No 1 Oil

I've said it before, and I'll say it again. The thing I love most about woodworking is the community around us. I meet some fantastic people within it.

time-read
1 min  |
October 2024 - Issue 280
Milwaukee FUEL 61/2" Circular Saw
Popular Woodworking

Milwaukee FUEL 61/2" Circular Saw

Milwaukee recently announced their next generation of tools and batteries at their annual Pipeline showcase.

time-read
1 min  |
October 2024 - Issue 280
Scraping is Quicker than Sanding
Popular Woodworking

Scraping is Quicker than Sanding

No matter what grit sandpaper you use on end grain, there's one hand tool that can get the job done faster: the No. 80 scraper.

time-read
1 min  |
October 2024 - Issue 280
Bosch Brushless Planer
Popular Woodworking

Bosch Brushless Planer

Every once in a while I'm fortunate to be struck by serendipitous situations in this job.

time-read
1 min  |
October 2024 - Issue 280
Spring Green Saws
Popular Woodworking

Spring Green Saws

Some of the nicest saws around are coming out of Warwick, RI, at the hands of Charlie Earnest.

time-read
4 Minuten  |
October 2024 - Issue 280
Bank Manager's Desk
Popular Woodworking

Bank Manager's Desk

With its quartersawn oak, and Arts & Crafts finish, this desk is sure to serve generations to come.

time-read
8 Minuten  |
October 2024 - Issue 280
Record Stand
Popular Woodworking

Record Stand

Brush up on your precision miters, and build this mid-century inspired record player stand.

time-read
7 Minuten  |
October 2024 - Issue 280
Carving a Spoon
Popular Woodworking

Carving a Spoon

Wooden spoons can be as elaborate or utilitarian as you'd please. Either way, it's a great way to spend time in the shop.

time-read
8 Minuten  |
October 2024 - Issue 280