When my colleague Roy and I bought a Fairey Atalanta A142, it was cosmetically in very good condition, but under the shine were some serious defects.
Perhaps the most obvious were the toe rails. These were made of 2in x ¾in hardwood strips mounted on ¾in bobbins, or bearers, where the rail was fixed to the deck.
The rails had suffered from impact damage and rot, especially where the pulpit and pushpit had been added on top of them.
We wished to keep the boat as original as possible so wanted to replace the toe rails with new wooden ones.
The challenge was how to bend the rails, as the bend needed to be across the width of the wood rather than its thickness. As well as that, they also had to twist to follow the contours of the boat.
The technique we used could be used for many projects: making a coaming top or gunwale capping, for example.
We started by searching the internet to find out if air- or kiln-dried wood would be best. The answer was inconclusive so we bought a large plank of air-dried local oak from a saw mill and started by sawing and dressing it to size.
Even though we’d never steamed a piece of wood before, we could see that using the methods available to us, bending it across its width was probably going to be impossible. It was something that could be done in a pressurised steam chest – but not in our shed.
Esta historia es de la edición Summer 2021 de Practical Boat Owner.
Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.
Ya eres suscriptor ? Conectar
Esta historia es de la edición Summer 2021 de Practical Boat Owner.
Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.
Ya eres suscriptor? Conectar
Orca sink yacht in Strait of Gibraltar
Spain's maritime rescue service, Salvamento Maritimo, has reported that a 15m (49ft) yacht sank in Moroccan waters in the Strait of Gibraltar following interaction with a pod of orca.
No kill cord or lifejackets were worn during fatal powerboat crash
A kill cord and lifejacket are useless unless worn-that's the warning from the Marine Accident Investigation Branch (MAIB), following its investigation into a powerboat crash that killed a 32-year-old woman and five-year-old girl on 2 October 2022.
Multihull sail work
Brush up on multihull sailing skills before heading off on charter with Gavin Le Sueur's guide to spinnaker handling, tacking and gybing
Five top causes of engine failure and how to prevent them
Jake Kavanagh talks to Sea Start marine engineer Nick Eales about how to avoid the five major causes of an engine breakdown at sea
Sail the Atlantic with strangers
Would you sail across the Atlantic with someone you've just met? Ali Wood meets the cruising crews who've done just that
IZIBoat: simple sailing
Rupert Holmes sails an innovative catamaran design intended to widen participation in sailing among those with little time to get on the water in more conventional craft
30 WAYS TO GET AFLOAT
From tall ships to small dinghies, you needn't own a boat to sail. Ali Wood looks at the options, and how skippers can also find crew
Boats for restoring under £20,000
Duncan Kent picks the best sub-35ft sail and power boats to look for when aiming to undertake a restoration on a budget
Seaworthy dinghies for less than £500
For low cost traditionally-styled GRP trailer-sailers, consider the Foreland and the Otter available at bargain basement prices
Playing with coloured sails
Maintaining an hourglass-shaped balloon and ratcheting up the log numbers