Flying Precision Rolls

The secrets to smooth, well-positioned maneuvers

- DAVID SCOTT

Together with loops, rolls are the bedrock upon which aerobatic flying is built. Learning to perform them correctly and efficiently is integral to opening the door to thousands of different maneuvers. There are varying opinions regarding the best approach to teach rolls, and certain methods can promote faster rates of learning and more successful results. This article features the timeless crawl-walk-run method which, during 1st U.S. RC Flight School’s aerobatic courses, proved to be one of the most time-effective approaches for developing roll proficiency.

BASIC ROLLS

The basic aileron roll starts by pulling the airplane up into a 10- to 20-degree climb. This way, the pilot doesn’t have to worry about altitude or the ground and can then apply full left- or right-aileron and roll all the way around (Figure 1). The most important step in this sequence is making sure that you’ve neutralized the elevator used to set the climb before you apply aileron. This precaution ensures that the roll remains axial and on the same heading. Novice pilots must be especially careful not to get ahead of themselves by directly applying aileron while holding in the elevator. This can result in a clumsy barrel roll and loss of heading (Figure 2). Once you have initiated the roll, you need to focus all of your attention on preparing to quickly neutralize the aileron the instant the wings approach level.