A miter box is a three-sided wood or plastic tool with open ends, which allow pieces of moulding or millwork to slide into position. It’s used with a backsaw, a rectangular saw with a reinforced spine that keeps the blade rigid. The saw fits into vertical slots in the miter box, set at the precise 45 or 90-degree angles needed to cut miter joints. You’ll need to cut a host of them if your job includes areas where the moulding turns at an outside corner.
To miter trim at an outside corner, cut two pieces of moulding at mating 45-degree angles. Fit together to form a tight right angle. It’s OK if there’s a slight gap at the back of the joint; it’s the “show” side that’s important. For mouldings to be installed flush (resting on the surface of the wall), nail the two mitered sides together with small finishing nails. If the moulding is sprung (installed at an angle to span perpendicular surfaces), glue the joint together.
This story is from the {{IssueName}} edition of {{MagazineName}}.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the {{IssueName}} edition of {{MagazineName}}.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber? Sign In
Navigating the Lumberyard - Here's some lumber lingo you should know before you venture into a lumberyard.
Here's some lumber lingo you should know before you venture into a lumberyard. Almost everyone fixing an old house will end up at a lumberyard-whether it's a local supplier or the organized aisles of a big-box home-improvement store.
a farmhouse renewed
Sensitive renovations and restoration work preserved a house that dates to 1799.
AN OVERVIEW OF METAL ROOFING
METAL ROOFS ARE RESURGENT, FOR GOOD REASONS.
ENDURING BEAUTY IN WALLS of STONE
Now back in the family who had been here since 1830, the old farmhouse is again ready for generations to come. Additions dating to 1840 and the 1950s were preserved.
ARCHITECTURAL DETAILS COME TO LIFE
Owners and their designer celebrate the unique features of a 1912 Arts & Crafts Tudor.
For a Wet Basement Wall
If there's problem common to old houses, it's a wet basement. I'm not talking about occasional flooding, but rather a basement that apparently seeps or leaks after even a rain shower or during snowmelt. Several approaches are available; sustainable solutions will get to the root of the problem.
Patching a Plaster Wall
Fix a hole in the wall with a few common tools and some drywall supplies. Practice your technique!
Roofing & Siding
Make note of these historical and unusual materials for the building envelope.
The Riddle of the water
When water incursion happens, the roof isn't necessarily the culprit. Maybe snaking a drain line, or clearing debris from a clogged gutter, temporarily will stem a leak. But a recurring problem usually means other forces are at work. It takes persistence-and a team with the right skills and patience—to identify the source and apply a solution.
Light-filled Craftsman Redo
For a dark kitchen in a 1914 Illinois house, the trick was anchoring white expanses with woodsy warmth.
