By now, the HOT ROD audience knows there are a ton of ways to build an LS engine for big power. Given the versatility of the LS platform, how do you decide which way to build it? The first thing you need to ask is how you want to use it. If hard handling is in your future, then saving weight by going with an aluminum block makes sense. Of course, saving weight in a drag application helps, but it's not nearly as critical and makes not a lick of difference in a street cruisier application. The benefit of an iron block is strength, which moves up the priority list quickly if you're considering boost or some nitrous in your future. An iron block, even an aftermarket version, will also be quite a bit less expensive compared to the equivalent aluminum version.
We wanted to build a rowdy LS for a Chevelle that was 80 percent street cruiser and 20 percent weekend-warrior drag car. Given these parameters, the smart bet was an iron block, and since we wanted a decent amount of displacement, we opted for an iron LSX block from Chevrolet Performance. It's vastly less expensive than an aftermarket aluminum block and has a lot of improvements over a stock OE block. Here's one way to build a large displacement LS engine with an abundance of power and decent street manners.
01 The Chevrolet Performance Parts LSX Bowtie iron block (PN 19213964) from Summit Racing offers quite a few features not found on factory LS blocks. Improvements include extra head bolt provisions, thicker deck surfaces, and other refinements like improved bay-to bay breathing, doweled main caps, a seventh transmission bolt hole, and a priority-main oiling system.
This story is from the {{IssueName}} edition of {{MagazineName}}.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the {{IssueName}} edition of {{MagazineName}}.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber? Sign In
What Is Pro Street?
You know it when you see it.
Pro Street in Pure Vision
Builder Steve Strope weighs in on the Pro Street look and what he would build today.
THE GAS ERA LIVES ON
These vintage race cars chart the evolution of technology in the early days of drag racing.
MOTOR HEAD FOR LIFE
Scott Sullivan is one of the original Pro Street pioneers. He still builds cars today out of a small shop in Dayton, Ohio.
BRINGING BACK PRO STREET!
David Freiburger and Roadkill Garage built a Pro Street Nova.
SWEET ASPIRATIONS
Jerry and Matthew Sweet added an 800ci Pro Stock mountain motor to chase HOT ROD Drag Week's Pro Street NA Record.
Making Bad Decisions Badder
Bradley Gray's 1970 Nova is a Hybrid! It's a streetable Funny Car.
ART PROJECT
This Rad Rides by Troy-built '63 split-window Corvette went from restaurant prop to ripping up the street!
WHERE DO WE GO FROM HERE?
THE PRO STREET ERA PEAKED IN THE '80S. ARE WE IN THE BEGINNING OF A RESURGENCE?
Making Connections
Project T-top Coupe: We install a Terminator X Max for big power.