REAL SWINGER
4LOW Offroad Magazine|December/January 2021
Oversized tires and heavy wheels can wreak havoc on stock tire carriers.
- Christian Sturtz
REAL SWINGER

The additional weight can break the carrier itself or ruin the tailgate. Thankfully, KD Fabworks makes full replacement heavy-duty rear bumpers with swing-out tire mounts for Jeep TJ/LJ applications. Standard features on the bumper include D-ring mounts, a 2 receiver, a tapered roller bearing pivot, frame tie-in brackets, a grade 8 hardware kit with optional high lift mount, and a third brake light license plate holder. (Figure 1)

In a normal install, you would start by removing the original rear bumper and tire carrier. Removal is pretty straight forward- the bumper has two nuts on each side and two bolts that come up from the bottom. Four bolts hold on the tire carrier, but you have to remove the third brake light housing to get to some of them. You also have to cut and cap off, or wrap-up, the third brake light wires. This Jeep had no bumper, so none of this was necessary for our application.

To start our install, we removed the rear cab mount bolts completely and loosened the other four cab mount bolts on both sides. The rear corner was jacked up, and cab mounts were removed. We slid the new bumper into place, the cab mount was replaced through the bumper into the frame, and we lowered the cab. Finally, we marked the six additional mounting holes for the new bumper. We tried to cut down a pencil and mark the inboard outer bolt holes. No luck! Hands wouldn’t fit. We ended up having to measure these out. (Figure 2)

この蚘事は 4LOW Offroad Magazine の December/January 2021 版に掲茉されおいたす。

7 日間の Magzter GOLD 無料トラむアルを開始しお、䜕千もの厳遞されたプレミアム ストヌリヌ、9,000 以䞊の雑誌や新聞にアクセスしおください。

この蚘事は 4LOW Offroad Magazine の December/January 2021 版に掲茉されおいたす。

7 日間の Magzter GOLD 無料トラむアルを開始しお、䜕千もの厳遞されたプレミアム ストヌリヌ、9,000 以䞊の雑誌や新聞にアクセスしおください。

4LOW OFFROAD MAGAZINEのその他の蚘事すべお衚瀺
TRAIL REPORT: Gladiator Trail
4LOW Offroad Magazine

TRAIL REPORT: Gladiator Trail

There are many trails within the Chokecherry Canyon area of Farmington, New Mexico.

time-read
2 分  |
February/March 2021
CHASING SQUIRRELS
4LOW Offroad Magazine

CHASING SQUIRRELS

“ There is a hole here,” I said, gazing through the lime green tubing as the front passenger tire inched closer to the hole. “Uh-huh,” he replied.

time-read
6 分  |
February/March 2021
4LOW Offroad Magazine

PUT IT OUT!

ALWAYS CARRY A FIRE EXTINGUISHER

time-read
5 分  |
February/March 2021
4LOW Offroad Magazine

STAMPEDE AMONG THE PANDEMIC

STAMPEDE AMONG THE PANDEMIC

time-read
2 分  |
February/March 2021
STEERING THAT IS FORGIVING
4LOW Offroad Magazine

STEERING THAT IS FORGIVING

A challenge, as your o -road daringness increases, is how to keep your steering safe.

time-read
5 分  |
February/March 2021
GLAMIS BLACK BAG PROJECT
4LOW Offroad Magazine

GLAMIS BLACK BAG PROJECT

Keeping Glamis clean for all to enjoy

time-read
1 min  |
February/March 2021
LIGHTEN THE RIDE OFF YOUR RIG
4LOW Offroad Magazine

LIGHTEN THE RIDE OFF YOUR RIG

Aftermarket suspension systems typically use one of three end types on their suspension links.

time-read
4 分  |
February/March 2021
FIRST GENERATION BRONCO VS. 2021 FORD BRONCO SPECS
4LOW Offroad Magazine

FIRST GENERATION BRONCO VS. 2021 FORD BRONCO SPECS

A comparison of the data. The first-generation Ford Bronco, released in 1966 and after vs. the 2021 Ford Bronco.

time-read
1 min  |
February/March 2021
4LOW Offroad Magazine

DIXIE 4 WHEEL DRIVE - NAMED TORA RETAILER OF THE YEAR AT SEMA

Some four-wheel-drive shops feel like institutions. They’ve been around in everyone’s memories forever, so you know they’ve existed for a long time. Dixie Four Wheel Drive has long been one of those establishments in St. George, Utah.

time-read
1 min  |
February/March 2021
ANOTHER SHAFT OPTION
4LOW Offroad Magazine

ANOTHER SHAFT OPTION

Two key components that take a beating on an off-road vehicle are the front and rear driveshafts.

time-read
1 min  |
February/March 2021