The disassembly and assembly of a pressed up multi-cylinder crankshaft is considered by many to be a specialist job, carried out behind closed doors with mystique and intrigue, but it’s actually quite an easy job to do at home if you have a few bits of basic engineering equipment.
With the crankcases finished, it was time to start adapting a standard four-cylinder Z1 crankshaft to fit my new six-cylinder engine. The standard Z1 crankshaft is a pressed up design made from eight hardened steel webs and a central shaft containing the cam-chain drive sprocket. The webs vary in shape and purpose. One web incorporates the primary drive gear; four webs incorporate big-end journals; and the other four webs incorporate the main bearing journals. There are six roller bearings that run directly on the hardened main journals and the hardened outer rings of the roller bearings locate in the crankcases with pegs to align oil feed holes.
The first job I had to do was to strip down two Z1 crankshafts and I was expecting some trouble! I remembered the force required to strip a Z1 crankshaft when I was making my Kawasaki Z1600 V8 over 20 years ago, it stretched the limits of my hydraulic press and I wasn’t looking forward to it. The first thing I had to do was make a couple of support bars from high tensile steel that fit between the webs, making them as thick as possible to take the load required to press the crank-pins and journals from the webs. I had a length of 30mm square EN16 steel bar that was ideal, so I cut off two bits about a foot long, but they would need reducing to 23mm thick in the centre using my milling machine, so that they would fit in the gap between the webs.
この記事は Classic Motorcycle Mechanics の June 2020 版に掲載されています。
7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。
すでに購読者です ? サインイン
この記事は Classic Motorcycle Mechanics の June 2020 版に掲載されています。
7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。
すでに購読者です? サインイン
Honda VFR750R - RC30
If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…
Mountain tension!
Award-winning motorcycle engineer!
Fazer set to STUN!
What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.
Project Suzuki TS400 Part 8 Loom with a view!
We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?
Project Yamaha TX750 Part 12 A question of balance…
Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?
Splitting links
Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.
STAVROS: PRINCE OF PRANKSTERS!
It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.
Metal magic!
Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .