Adapting to the need of the hour
ET Polymers|April - May 2020
We are ready to diversify to sustain our growth and look for other avenues and equipment demands, says Haren Sanghavi, Director, GMS Plastic Machinery Pvt. Ltd.
- Niranjan Mudholkar
Adapting to the need of the hour

Briefly tell us about the journey of GMS Plastic Machinery since its inception.

GMS started in the year 2000 as a joint venture with M/s. Gamma Meccanica S.p.A., Italy. GMS manufactures plastic extrusion machines with core in waste recycling of plastics. Initially, GMS was dependent on Italy for designs and support but as the team developed, we are today completely independent and have created various equipment in India as well. Now, our hundred percent equipment are produced in India.

How’s been the business for GMS Plastic Machinery in the last one year?

For the year 2019, we clocked 30 percent higher turnover than the previous year. In 2020, if Covid-19 would not have locked us out, we would have crossed our turnover by 20 percent higher than 2019. Covid-19 will lead us to remain at same level of 2019.

Where does GMS Plastic Machinery stand in terms of market share?

In terms of market share, GMS is the number one with nearly 450+ machines already performing with our clients to their brim. Most clients have given us repeat orders. We have a 100 percent retaining ratio in the market when it comes to customer satisfaction.

Where is your production unit located? What kind of manufacturing capabilities and capacities do you have?

この蚘事は ET Polymers の April - May 2020 版に掲茉されおいたす。

7 日間の Magzter GOLD 無料トラむアルを開始しお、䜕千もの厳遞されたプレミアム ストヌリヌ、9,000 以䞊の雑誌や新聞にアクセスしおください。

この蚘事は ET Polymers の April - May 2020 版に掲茉されおいたす。

7 日間の Magzter GOLD 無料トラむアルを開始しお、䜕千もの厳遞されたプレミアム ストヌリヌ、9,000 以䞊の雑誌や新聞にアクセスしおください。

ET POLYMERSのその他の蚘事すべお衚瀺
The Changing Face Of Mobility
ET Polymers

The Changing Face Of Mobility

A brief look at the salient points on how plastics is transforming automotive manufacturing

time-read
6 分  |
Aug-Sept 2021
Nippon Launches Weatherbond PRO
ET Polymers

Nippon Launches Weatherbond PRO

Nippon Paint (India) Private Limited (Decorative Division) Asia’s leading paint manufacturer launched the advertising campaign for Weatherbond PRO – the high durable exterior emulsion offering up to 15 years of protection against extreme climate conditions like prolonged exposure to heat, and heavy spells of rain. Based on extensive research done by Nippon Paint’s R&D team, this product was developed for customers who need advance protection for their home exteriors in terms of extended fresh look, strong waterproofing and protection from Algal and Fungal attacks.

time-read
1 min  |
Aug-Sept 2021
Low-Pressure Molding Adopted Across Industries
ET Polymers

Low-Pressure Molding Adopted Across Industries

Henkel’s Technomelt Low-Pressure Molding technology meets demands for encapsulation of electronics and medical components

time-read
4 分  |
Aug-Sept 2021
TotalEnergies and Jindal Films To introduce Certified Circular Polypropylene
ET Polymers

TotalEnergies and Jindal Films To introduce Certified Circular Polypropylene

TotalEnergies and Jindal Films have joined forces to produce more sustainable flexible food packaging and labels. Using advanced recycling technology from Plastic Energy, TotalEnergies will supply Jindal Films with Certified Circular Polypropylene produced from postconsumer plastic waste. This new value-chain collaboration will divert plastic waste currently destined for incineration and landfill because it is too complex to recycle through existing schemes.

time-read
2 分  |
Aug-Sept 2021
Lenzing's VEOCEL™ Brand Launches Hydrophobic Lyocell Fibres With Dry Technology
ET Polymers

Lenzing's VEOCEL™ Brand Launches Hydrophobic Lyocell Fibres With Dry Technology

In its quest to drive greater sustainability in the personal care and hygiene industry, the VEOCEL™ brand has launched a new offering: VEOCEL™ branded lyocell fibres with dry technology which are naturally smooth and gentle on skin, ensuring comfort for sensitive skin. Absorbent hygiene products are an indispensable part of many consumers’ lives and are relied upon daily. As these are essential items, it is important that they should offer maximum comfort and relief to the user. This is demonstrated by the new VEOCEL™ branded lyocell fibres which have the capacity to provide a high level of comfort, softness and dryness, when applied in these types of products.

time-read
1 min  |
Aug-Sept 2021
Simulating Injection Molding for Efficiency
ET Polymers

Simulating Injection Molding for Efficiency

Producing high-quality, plastic injection-moulded parts more quickly and cost-effectively has become a critical factor for manufacturing success in today’s global market. Instead of engaging in slow, expensive prototype iterations and test cycles to satisfy manufacturing requirements, designers, mold makers, and manufacturing professionals can leverage SOLIDWORKS® Plastics mold-filling simulation software to optimise parts for manufacturability, refine tooling to improve quality and shorten cycle times to reduce manufacturing costs

time-read
10 分  |
Aug-Sept 2021
Leveraging 3D Printing for optimised Injection Molds
ET Polymers

Leveraging 3D Printing for optimised Injection Molds

A guideline from Formlabs on the factors to consider before using stereolithography (SLA) 3D printed molds in the injection molding process to lower costs, reduce lead times, and bring better products to market

time-read
8 分  |
Aug-Sept 2021
iglidur I151 for FDA-compliant, Detectable, Wear Resistant Parts In Food Technology
ET Polymers

iglidur I151 for FDA-compliant, Detectable, Wear Resistant Parts In Food Technology

igus has developed a blue, food-compatible tribo-filament for cost effective 3D printing of special parts. iglidur I151 is blue, prints easily, and has an optimal coefficient of friction and wear. The new tribo-filament is a refinement of the easy-to-machine igus iglidur I150 all-rounder filament. Because it is blue, it can be used to manufacture special parts that are optically detectable in the food industry. Food compatibility according to the FDA and to EU Regulation 10/2011 also qualifies the high-performance polymer for use in the food and cosmetics industries.

time-read
1 min  |
Aug-Sept 2021
Exceptional Warpage Control
ET Polymers

Exceptional Warpage Control

SABIC’s new LNP™ THERMOCOMP™ compounds deliver exceptional warpage control

time-read
5 分  |
Aug-Sept 2021
Digital Transformation in Plastics
ET Polymers

Digital Transformation in Plastics

Automation in the plastics industry is becoming more complex, the pace of innovation is accelerating, and competitive pressure is increasing. Open and safe automation makes it possible to combine traditional mechanical engineering with the latest Industry 4.0 technologies – Lets take a look at how Industry 4.0 is transforming the plastics sector

time-read
8 分  |
Aug-Sept 2021