Ian Priest gives some thought to this important topic and its consequences.
Some time ago I read with interest a debate on the Model Engineers’ Workshop forum regarding the various methods employed to clamp jobs or pieces of equipment to machine tables be they milling, lathe, shaping or any other.
In particular one contributor asked the greater audience to consider how to avoid sections of a ‘Tee’ slotted machine bed from breaking when clamping down. This is not an uncommon issue, in the past I’ve seen articles on how model engineers have made good, broken sections of machine tables. Indeed, in industry there are companies whose sole business is the repair of similar disasters. Therefore, as model engineers we are not alone, much better however to avoid the situation in the first place.
I would perhaps suggest the following as a more suitable way of securing our various bits and bobs to our precious machine tables. However, before we do that the requirements of any clamping solution needs to be considered.
Considerations
Be strong and robust enough to perform the required task. This sounds pretty much a given but the clamping solution needs to be ‘only just strong enough’ and not so big and powerful that any judicious over tightening is injurious to the machine.
Be safe, again a given but although we want our clamping system to be up to the job of securing items to a machine table we don’t want it to be so powerful that the inexperienced can easily over do it causing damage to the machine. We need a failsafe mechanism incorporated into the clamping system.
Be flexible, not in terms of use, in that sense we need it to be as rigid as possible, but insomuch that it easily lends itself to a variety of applications. I find it very frustrating at times not to have at hand just what I need to bolt something down.
この記事は Model Engineers' Workshop の February 2018 版に掲載されています。
7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。
すでに購読者です ? サインイン
この記事は Model Engineers' Workshop の February 2018 版に掲載されています。
7 日間の Magzter GOLD 無料トライアルを開始して、何千もの厳選されたプレミアム ストーリー、9,000 以上の雑誌や新聞にアクセスしてください。
すでに購読者です? サインイン
Readers' Workshops - Patrick Cubbon
Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation
Desktop Gear Hobbing
Toby Kinsey has designed this fascinating piece of gearmaking equipment
The John Stevenson Trophy 2020
Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.
From the Archives: Twist drill Sharpening by the Four Facet Method
Giles Parkes, MEW Issue 64, February/March 2000
Dividing on the Warco 220 Lathe
Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines
Choosing Steels
Stub Mandrel offers some advice on choosing the right steel for the job
A Storage Story
Robin King shares the lessons learned from his experience of workshop moves
A Simple Drill Grinding Aid
A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him
Yet Another Bodge-Up!
Peter Shaw finds a use for some aged homebrew slot drills.
Workshop Press Tooling Part 2
Will Doggett makes a set of tooling for his press tool described starting in issue 285