Bruce Smith of Sportsparts in Australia shares his thoughts on the B-series lubrication system, and how oil supply can be improved.
Some years ago, when I was racing a car powered by a BMC B-series engine, I had the misfortune to have an oil pump drive fail. This in turn destroyed the camshaft and put all the resultant metal through the engine, necessitating a full engine rebuild, not to mention needing a new oil cooler too.
To find out how I could stop this happening again, I decided to do some investigating. The first thing I discovered was that this is a common problem when more than about 6200rpm is used. Part of my research involved finding out the full intricacies of the B-series oil system. There are basically two different systems: bypass filtration and full flow. The manufacturers were very clever in the relatively minor modification to change from bypass to full flow – they basically did it by making a new union and a new bolt. What happens is that the oil in the sump enters a strainer, goes up through the pump and then diagonally up through the back of the block to a horizontal drilling that runs the full length that block on the right hand side, passing the pressure relief valve on the way.
In the blocks that have a bypass system, the oil enters this drilling which supplies oil to all the places where it is needed for lubrication. In addition, some of it enters the filter and then passes through a hollow bolt from which it drops back into the sump.
In the full flow system there is a union with an extended tube that comes up diagonally at the back of the block and which enters the horizontal drilling previously mentioned. This union prevents any of that oil entering the drilling. Instead it goes via a pipe or hose, depending on whether the engine has an oil cooler or not, to the filter. The bolt on this filter is solid, not hollow as previously. After passing through the filter, the oil then goes into the same horizontal drilling as before.
Denne historien er fra November 2017-utgaven av MG Enthusiast.
Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.
Allerede abonnent ? Logg på
Denne historien er fra November 2017-utgaven av MG Enthusiast.
Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.
Allerede abonnent? Logg på
Love and devotion
Bob Nason waited eight years to get the car of his dreams and, 19 years later, he’s still smitten with it...
Tidy-up time
Craig continues his quest to save the modified ZS 120 he told us about in December’s issue of MGE and takes advantage of a break in the weather to focus on its bodywork.
XPress power
MGs on Track regular, Dave Pearce, has a range of MGs at his disposal including this rather special XPower SV-R.
Sparking memories
MGE reader Peter Morrey recalls his very first MG, his family’s experiences of the then-new MGA and advice from a chap with a bit of MG insider knowledge.
Gerry McGovern
When the MGF appeared, in 1995, it marked a return to the market for MG sports cars. MG Enthusiast caught up with the man responsible for the car’s styling.
MG's Twin-Cam engine
The Twin-Cam engine arrived in 1958 but was it a success?
Eyes peeled
This month Roger looks at other drivers’ habits and ponders whether autonomous vehicle lighting helps or hinders road users?
Dear Sir...
Paul Moran’s beautifully restored 1933 Midget J2 comes with some interesting documentation which illustrates just how the privileged new car owners of the 1930s dealt with the absence of a warranty.
CHEQUERED FLAG
THE ROADS LESS TRAVELLED... AND WHY THEY ARE WORTH SEEKING OUT
2019 HSRCA SPRING FESTIVAL
The 2019 Historic Sports and Racing Car Association Spring Festival was run during a brilliant spring weekend, between 28-29 September, in Goulburn (regional New South Wales).
