British Columbia's New Cable Ferry Always On Its Moorings
Professional Mariner|December/January 2017

This is not a regular ferry, this is not a regular ferry.

Alan Haig-Brown
British Columbia's New Cable Ferry Always On Its Moorings

BC Ferries project manager Mark Nemeth repeated this mantra to himself in the early stages of building Baynes Sound Connector at Seaspan’s Vancouver Shipyards. As a cable vessel it isn’t unique, but at 258 feet it is one of the largest of its type. It also operates on the longest cable ferry run in the world.

Baynes Sound is a narrow channel between 12-mile-long Denman Island and the east coast of Vancouver Island. For years, a conventional ro-ro ferry served the run of about 1.2 miles. When it came time for a new ferry, officials noted that the channel is about 195 feet at its deepest point and generally has a sandy bottom, which would allow cables to lie on the sea floor without damaging the lines or the environment. While it is subject to strong winter southeast winds, the reach is not so long that wave heights become excessive.

Baynes Sound Connector was launched at the Vancouver Shipyards in 2015. Following finishing work alongside the shipyard, the boat was towed to the site where the cables already had been installed. It went into service early in 2016 after a period of testing and crew training.

Nemeth had taken early retirement as an engineering superintendent with the BC Ferry Corp., but he went back to work to join the vessel replacement team for construction of the boat. Of retirement he said, “We drove all over North America in our mobile home but when I came back home to BC, I needed something to do.”

He enjoys his new work and is particularly enthusiastic about Baynes Sound Connector. Somewhere between a barge and a boat, the ferry operates by pulling itself along a 6,233-foot-long cable that is 1.6 inches in diameter. Two guide cables of the same diameter are anchored in massive concrete piers and then pass through sheaves under the ferry’s sponsons. Top speed is 8.5 knots.

Denne historien er fra December/January 2017-utgaven av Professional Mariner.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra December/January 2017-utgaven av Professional Mariner.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA PROFESSIONAL MARINERSe alt
Mariner's role still unknown as autonomous shipping gains speed
Professional Mariner

Mariner's role still unknown as autonomous shipping gains speed

Mariners’ role still unknown as autonomous shipping gains speed

time-read
6 mins  |
December - January2021
Piracy edges closer to home with wave of raids in southern Gulf
Professional Mariner

Piracy edges closer to home with wave of raids in southern Gulf

In the brief cellphone video recorded by a crewmember on the offshore supply vessel (OSV) Remas, the pirates walk back and forth on the deck of the ship, clenching their guns and using them to point as they order around the crew. Their faces are draped in clothing and bandanas.

time-read
4 mins  |
December - January2021
Casualties
Professional Mariner

Casualties

NTSB: Dredge hit Texas gas pipeline, causing fire that killed four

time-read
4 mins  |
December - January2021
IMO emissions report raises new concerns about methane slip
Professional Mariner

IMO emissions report raises new concerns about methane slip

A recent report from the International Maritime Organization (IMO) reveals that global shipping emissions increased nearly 10 percent from 2012 to 2018, with the industry facing a growing challenge concerning methane slip.

time-read
3 mins  |
December - January2021
Bay State brothers find industry niche by making old into new
Professional Mariner

Bay State brothers find industry niche by making old into new

Zero non-conformities is what you want to hear when the U.S. Coast Guard inspects your tugboat. Once you’ve prepared your vessel, the inspectors come aboard to peruse your paperwork. They ask you pointed questions, to which they expect straightforward answers. Perusal completed, they then scrutinize all of the related safety systems, from bilge to antennas — even the ship’s bell.

time-read
5 mins  |
December - January2021
Signals
Professional Mariner

Signals

A year into the pandemic, thousands ‘essentially indentured’ on ships

time-read
3 mins  |
December - January2021
Analysis points to faulty loading, low ballast in Golden Ray rollover
Professional Mariner

Analysis points to faulty loading, low ballast in Golden Ray rollover

While the salvage of the sunken vehicle carrier Golden Ray has been delayed for months due to COVID-19 and the hurricane season, analysis by the U.S. Coast Guard has determined a possible cause for the rollover: a combination of vehicles placed too high on the ship’s decks, and not enough ballast water gave the placement of the cargo.

time-read
2 mins  |
December - January2021
Seastreak newcomer pushing through dip in demand
Professional Mariner

Seastreak newcomer pushing through dip in demand

Two years ago, Seastreak LLC took delivery of Seastreak Commodore, a 600-passenger fast ferry, from Gulf Craft of Franklin, La. Designed by Australia-based Incat Crowther, the vessel is the largest of its kind in the United States and was built to meet the burgeoning demand for service in the New York-New Jersey market.

time-read
2 mins  |
December - January2021
New year in a new world: Navigating COVID's maritime realities
Professional Mariner

New year in a new world: Navigating COVID's maritime realities

In a matter of days, the decorative time balls will drop, “Auld Lang Syne” will fill the air, and ships at anchor will sound their horns as the world welcomes in the new year.

time-read
4 mins  |
December - January2021
Advanced props, rudders provide new efficiencies below the waterline
Professional Mariner

Advanced props, rudders provide new efficiencies below the waterline

It took a decade or two from the invention of the marine propeller in the 19th century for the technology to become widely accepted. Thereafter, adoption has been nearly universal, but progress toward improved efficiencies has come in fits and starts.

time-read
5 mins  |
December - January2021