Fishers’ 1/32 F9F-2 Panther
Kit No: 3206
Scale: 1/32
Type: Resin
Manufacturer: Fisher Models http://fishermodels.indiemade.com/
The USN issued a contract on 22nd April1946 for the XF9F-1, which was to become the Panther. This was the early era of jet power and reflected a steep learning curve in both technology and actual capabilities. The inefficiencies of first generation centrifugal flow and axial flow jet engines provided the Grumman team with a challenge. The Westinghouse J30 produced 1,500lb of thrust and to have adequate power in this airframe four engines were needed. This would produce an airframe much larger and heavier, which would hinder or prohibit use on an aircraft carrier during this era. Grumman decided to adopt the Rolls-Royce Nene centrifugal flow engine for the Panther with a conventional fuselage installation. This was designated XF9F-2 day fighter. The prototypes made their maiden flight on 24th November 1947.
The production aircraft adopted the Allison J33-A-8 engine, which produced 4,600lb of thrust. After production commenced it was discovered that the Allison J42 was a superior engine in power and reliability and this was to be fitted in all subsequent Panther -F9F-2s and 3s. The aircraft was also fitted with permanent wing tip tanks, which extended the range.
The final and most successful variant was the F9F-5, which was fitted with the J48 engine (versions P-2, P-4 and P-6A) that produced 6,250lb of thrust. The F9F-5 had a two foot extension of the fuselage, wing fences and a taller tail fin to accommodate the new engine. The airframe and power plant changes made for a better performing airframe but performance wise it still lagged behind the swept wing configurations of the USAF F-86 Sabre family and the Russian designed MiG-15. This would lead to the F9F-6 and 8 Cougar family of Grumman jet fighters, though that’s another story…
Denne historien er fra June 2017-utgaven av Scale Aircraft Modelling.
Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.
Allerede abonnent ? Logg på
Denne historien er fra June 2017-utgaven av Scale Aircraft Modelling.
Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.
Allerede abonnent? Logg på
Mustard
BAC's Low Speed Research Vehicle
KOVOZAVODY PROSTEJOV (KP) 1 Was Monty's Triple'
Brian Derbyshire
SPECIAL HOBBY SAAB J-21A Review
From the late 1930s and early 1940s, with thewar in Europe raging around them andedging ever closer to its borders, the Flygvapnet had ordered Seversky P-35A aircraft, alongside Vultee Vanguards, but only sixty of the former and none of the latter were received.
VFR MODELS Beagle B.121 Pup
This is the first 3D printed kit I have come across and it is really rather fine.
Hearts in the sky RIAT RETURNS
After a nearly three-year hiatus RIAT returned to our skies with a hot show in every sense of the word. SAM’s Mike Verier and Ray Ball were there.
Colour Conundrum
A Cancellation Conundrum - The RAF F-111s That Might Have Been Part 1
COPPER CAUDRON Caudron G.Ill in 1/32
Copper State Models have carved a name for themselves in the last few years producing high quality plastic kits of World War One subjects.
Academy RF-8A Crusader Conversion in 1/72
USMC squadron VMCJ-2 used six RF-8As during the Crisis (designation F8U-1P until September 1962), with others held in reserve, two flying out of Guantanamo Bay, and four out of NAS Key West.
The Cuban Missile Crisis
Modelling US reconnaissance assets in 1/72 Part 2: The Nuclear Confrontation
UKRAINIAT striker
The Sukhoi Su-24 is an all-weather attack aircraft capable of supersonic speeds and characterised by its side-by-side pilot/navigator seating and its variable geometry wing.
