Avoid Over-Filtration: The Importance Of Optimization
MACHINERY LUBRICATION INDIA|March - April 2023
Maintenance is the single most controllable expense in a facility. These words have been quoted time and time again, vis-à-vis controlling equipment failures.
Avoid Over-Filtration: The Importance Of Optimization

Few areas of focus are more impactful on managing expenses than contamination control. However, in the quest for the cleanest achievable oil, some questions typically form: How much filtration is too much filtration? Is there such a thing as oil that is too clean? While the questions are simple and straightforward, the answers are anything but, and include a variety of variables that many don’t account for when starting a fluid cleanliness program.

Among the first variables that I address when helping a customer develop a contamination control program is the type of fluid in question. Most industrial facilities will employ a range of lubricants for different machine types and environments. Determining where the focus should be for filtration begins with determining which fluids actually require filtration. That’s right — not all lubricants may need to be filtered prior to use.

Some Machines May Not Require Filtration

Denne historien er fra March - April 2023-utgaven av MACHINERY LUBRICATION INDIA.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

Denne historien er fra March - April 2023-utgaven av MACHINERY LUBRICATION INDIA.

Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.

FLERE HISTORIER FRA MACHINERY LUBRICATION INDIASe alt
The Secrets For Implementing A Clean lubricant Program
MACHINERY LUBRICATION INDIA

The Secrets For Implementing A Clean lubricant Program

If you could find an investment that guaranteed a return 40 times greater than your initial investment, you probably wouldn't pass it up.

time-read
4 mins  |
March - April 2024
MAINTAIN? REPAIR? REPLACE?
MACHINERY LUBRICATION INDIA

MAINTAIN? REPAIR? REPLACE?

When considering the life of any asset, the question arises: what types of interventions should be planned to keep it operating or to restore operation in the event of its failure?

time-read
4 mins  |
March - April 2024
Engineering Reports Should Be Like Bad Movies
MACHINERY LUBRICATION INDIA

Engineering Reports Should Be Like Bad Movies

I'm frequently asked to review engineering reports, and I'm continually baffled by how many engineers want to take their readers on a journey instead of getting to the point.

time-read
7 mins  |
March - April 2024
WHY SCHEDULED OIL CHANGES AREN'T ENOUGH TO MITIGATE LUBRICANT CONTAMINATION
MACHINERY LUBRICATION INDIA

WHY SCHEDULED OIL CHANGES AREN'T ENOUGH TO MITIGATE LUBRICANT CONTAMINATION

There are few problems more insidious or damaging to large industrial machinery than contaminated lubricant.

time-read
4 mins  |
March - April 2024
LUBRICATION CONTAMINATION PREVENTION
MACHINERY LUBRICATION INDIA

LUBRICATION CONTAMINATION PREVENTION

How many articles have you read, or seminars listened to, that tout the value of contamination control? If you are like me, they number in the hundreds—if not thousands. One thing about these articles and seminars that bothers me is the word “control”.

time-read
6 mins  |
March - April 2024
LUBRICANT CONTAMINATION PREVENTION AND MITIGATION: A Guide For Maintenance Professionals
MACHINERY LUBRICATION INDIA

LUBRICANT CONTAMINATION PREVENTION AND MITIGATION: A Guide For Maintenance Professionals

Lubricants are essential for the smooth and efficient operation of many types of machinery, from engines and turbines to gears and bearings.

time-read
5 mins  |
March - April 2024
TASK-BASED TRAINING | INSPECTING A SINGLE-POINT LUBRICATOR
MACHINERY LUBRICATION INDIA

TASK-BASED TRAINING | INSPECTING A SINGLE-POINT LUBRICATOR

A single-point lubricator is a device engineered to attach to a single unit to regularly and automatically deliver a small amount of clean grease or lubricating oil to a specific area.

time-read
3 mins  |
March - April 2024
TOP LEADERSHIP FOCUSES FOR IMPROVED RELIABILITY AND COST REDUCTION
MACHINERY LUBRICATION INDIA

TOP LEADERSHIP FOCUSES FOR IMPROVED RELIABILITY AND COST REDUCTION

Here’s a scenario that may sound eerily familiar – you have a new reliability initiative.

time-read
4 mins  |
March - April 2024
4 KEY ELEMENTS FOR INTERPRETING AN OIL ANALYSIS REPORT
MACHINERY LUBRICATION INDIA

4 KEY ELEMENTS FOR INTERPRETING AN OIL ANALYSIS REPORT

Years ago, a customer came into my office, visibly upset. He had just received his second oil analysis report for one of his Caterpillar gas engines.

time-read
4 mins  |
March - April 2024
ASTM ENHANCEMENTS TO MICROSCOPIC PARTICLE IDENTIFICATION AND DOCUMENTATION
MACHINERY LUBRICATION INDIA

ASTM ENHANCEMENTS TO MICROSCOPIC PARTICLE IDENTIFICATION AND DOCUMENTATION

In 1982, Daniel Anderson published his influential book, \"Wear Particle Atlas\", which describes, sizes, and classifies particles found in oil.

time-read
4 mins  |
March - April 2024