Don’t take your rig for granted. Show it some love before you start the season
During spring commissioning we often lavish far more attention on our engine and electrics than we do on the rig, even though the latter presents a much greater risk to both the boat and crew. Because standing rigging has so many possible weak points, it’s virtually impossible to work out when any part is about to fail. Therefore, close inspection should be a mandatory element of your preseason preps and checks.
It will rarely take more than a couple of hours to complete a detailed rig check, and in doing so there are a number of telltale signs you should look for. While you’re at it, there are several maintenance tasks you can carry out to prolong the life of your shrouds, spar and fittings.
When you’re inspecting your rig, be sure to take an inventory of all the parts and their dimensions, and photograph them. This will help should you ever have rig trouble far from home.
Every few years, you should also unstep the mast to check it over thoroughly at ground level. This makes close inspection of areas like the spreader roots, mast terminals and halyard sheaves much easier.
THE SPARS
Start rig checks by inspecting the spars, commencing with the mast step and foot. The high compression forces on the mast step can put severe strain on both the T-bar and step, particularly if there is any imbalance in the rig tension. It’s also an area where saltwater can gather in a pool, making it prone to corrosion. Look closely at any rivets around the base and at the mast section for signs of corrosion or cracks.
Denne historien er fra May 2017-utgaven av Sail.
Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.
Allerede abonnent ? Logg på
Denne historien er fra May 2017-utgaven av Sail.
Start din 7-dagers gratis prøveperiode på Magzter GOLD for å få tilgang til tusenvis av utvalgte premiumhistorier og 9000+ magasiner og aviser.
Allerede abonnent? Logg på
The Floating Classroom
Taking homeschooling to the high seas.
Adventures in Boat Buying
When all else fails, buy another boat
Seascape 18
A fast and simple sport boat that you can also cruise
Drilling Stainless Steel
How to make holes in a not-so-hard metal
Lost and Found
Stop! The ship you lose may be your own
Rick Tomlinson
Rick Tomlinson is one of yachting’s most accomplished photographers, but he is also an accomplished sailor.
Monster At Midnight
Mine is a fishing family. Whether we are running lines off the stern, spear fishing or casting from the boat, we’re always fishing.
Bring It On!
FIVE SAIL ING FRIENDS GO IN SEARCH OF HEAVY WEATHER — AND FIND IT
Wind Chicken Gone Wild
ON THEIR FIRST LONG OPEN-WATER PASSAGE, A SAILING COUPLE GETS INTO THE PROBLEM-SOLVING SIDE OF SAILING
Appendicitis Offshore
A stomach ache turns into a life-threatening emergency while on passage.