He’s finally listening to ‘she who must be obeyed’ as Ralph gets to work on his wife’s Kawasaki Z650 clutch.
We bought SWMBO’s (She Who Must Be Obeyed) Kawasaki Z650 C3 many moons ago in a series of rather tatty cardboard boxes.
Some parts were duplicated and some came up short, but for £150 I didn’t think we could go wrong. How many times have you heard that line?
The plan was to throw it together, get it running and think about throwing some money at it later on to pretty it up.
Age and excessive consumption of locally brewed Butcombe bitter has not aided my ability to recall accurately, but if memory serves me right, we are now on the third engine. It always seems so much easier to just buy another ‘good’ engine than go to all the time and expense of a major engine rebuild.
When the third engine wouldn’t play ball, I stripped it down to the last nut and bolt. I bead-blasted the whole engine and gearbox unit, sprayed it with etch primer, satin black, polished the shiny bits and bought it a Wiseco big bore kit. Because of its position, the starter clutch is a complete git to fix on a Z650, so I fitted a brand new complete unit and a new primary drive chain.
The diminutive Zed has caused me no end of hassle over the years and has had more than its fair share of rides in recovery vehicles, though in recent years it has behaved sufficiently well that SWMBO has managed to clock up a good number of miles and smiles.
Despite my hatred for the damned machine, the current Mrs Ferrand has insisted that Stinky (the side-stand mount is a bit knackered, making it lean over too far and thereby spilling petrol out of the float chambers if left for any period of time, hence ‘Stinky’) is her favourite bike and the only way it will be taken from her is from her cold, dead hands, mirroring my feelings for my 1977 Z100A1, which has been massively reliable.
This story is from the June 2019 edition of Classic Motorcycle Mechanics.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the June 2019 edition of Classic Motorcycle Mechanics.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber? Sign In
Honda VFR750R - RC30
If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…
Mountain tension!
Award-winning motorcycle engineer!
Fazer set to STUN!
What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.
Project Suzuki TS400 Part 8 Loom with a view!
We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?
Project Yamaha TX750 Part 12 A question of balance…
Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?
Splitting links
Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.
STAVROS: PRINCE OF PRANKSTERS!
It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.
Metal magic!
Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .