Test Ride Tales!
Classic Motorcycle Mechanics|August 2020
A test ride and then the big job of sorting the camshaft out: all in a day’s work for our Allen…
Test Ride Tales!

With the lockdown, rules relaxed I was finally able to take my Kawasaki Z1 Super Six for a test ride. The bike had been finished for a few months, but I had only ridden it across my garden a couple of times, which isn’t fair.

I had a gallon of petrol in the shed so I put it in the tank, turned on the petrol tap and waited a couple of minutes to check for leaks. All seemed fine so I put on the choke, pressed the starter button and it burst into life on fast idle and sounded great. It was a nice sunny day and I had been looking forward to this moment for weeks. As soon as I pulled away and went up through the gears it felt under-geared; I was almost straight into top gear as I approached 30mph and I could drop below 20mph in top gear and it would pull hard with no snatching in the transmission.

The bike has its original size 630 pitch chain and I had fitted the largest available 16T front sprocket and smallest 33T rear sprocket, so in order to raise the gearing even more I would need to make a smaller rear sprocket. I continued with the test ride and found that as it warmed up the carburation deteriorated and it started to hesitate on pick-up from low rpm. I decided to return home and investigate further and it turned out to be a sticking choke plunger on one carb. That was an easy fix.

This story is from the August 2020 edition of Classic Motorcycle Mechanics.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

This story is from the August 2020 edition of Classic Motorcycle Mechanics.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

MORE STORIES FROM CLASSIC MOTORCYCLE MECHANICSView All
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 mins  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 mins  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 mins  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 mins  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 mins  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 mins  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 mins  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 mins  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 mins  |
July 2021