On the throttle
Racecar Engineering|October 2020
OptimumG’s data master expands our knowledge of data analysis techniques
CLAUDE ROUELLE
On the throttle

If you’ve been following this year’s series of articles from OptimumG, you know we have shared some of the data analysis techniques used by our engineers in their day-to-day racing activities. So far, we have presented steering and braking performance metrics, and this article will focus on the throttle channel.

Of the three driver inputs, the throttle has two main functions: accelerating the car and, in some cases, using longitudinal tyre grip to balance it.

The tricky part is applying the correct amount of throttle. A driver can easily apply too much, too little, too fast or too slow. As a driver moves to higher racing series, which typically means more engine power, the more difficult it is to find the perfect throttle modulation.

Before we start looking at ways to analyse the throttle channel, using key performance metrics, it is important to first understand what a throttle trace looks like. Figure 1 shows a throttle trace for a long corner.

A throttle chart will have throttle percentage on the y-axis, the value going from zero to 100 per cent. Zero means the throttle is closed, at 100 per cent the throttle is fully open. The x-axis can either be in distance or time.

In Figure 1, the driver is applying full throttle up until the 3750m marker, but then releases the throttle and is braking to enter the corner. The driver picks up the throttle at 3825m on corner exit.

Similar to the V29N4 edition where we broke down the different stages of braking, we will be applying the same methodology in this article for the throttle by looking at the different stages during corner exit: ‘Start Corner Exit’, ‘Middle Corner Exit’ and ‘End Corner Exit’.

This story is from the October 2020 edition of Racecar Engineering.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

This story is from the October 2020 edition of Racecar Engineering.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

MORE STORIES FROM RACECAR ENGINEERINGView All
Racecar Engineering

Talk the torque

More thoughts on in-wheel motors and their effects on twisting force

time-read
6 mins  |
December 2021
Racecar Engineering

Rolling about

An explanation of the limitations of a previous load transfer article, bringing jacking forces into the mix

time-read
5 mins  |
December 2021
Racecar Engineering

F1 breaks schedule records

The FIA has confirmed no fewer than 23 races on the 2022 Formula 1 World Championship schedule, the highest number of grands prix ever to be held in a single season, and that has led to criticism from some teams that will be on the road for eight months.

time-read
1 min  |
December 2021
Under pressure
Racecar Engineering

Under pressure

Toyota may have finished first and second at Le Mans this year, but the effort required to overcome a fuel delivery problem and finish with both cars was Herculean

time-read
10+ mins  |
December 2021
Racecar Engineering

Physics at work

Dutch company, Intrax, offers Racecar Engineering an insight into the technologies it employs to optimise its suspension products

time-read
4 mins  |
December 2021
Racecar Engineering

Williams' 2030 ambition

Williams Racing has committed to becoming climate positive by 2030 as part of an all-new sustainability strategy.

time-read
1 min  |
December 2021
Racecar Engineering

Diff'rent strokes

Racecar looks at the different types of mechanical differential, their benefits and limitations

time-read
10+ mins  |
December 2021
Racecar Engineering

Das Boot

A curious Twitter exchange fired up a unique, hydrogen-powered, cross-country project that will contest the Baja 1000 in November 2022

time-read
8 mins  |
December 2021
Air born
Racecar Engineering

Air born

Every racecar engineer's dream is a blank sheet of paper design. When Hoonigan and Subaru approached Vermont Sportscars about building the next generation of Gymkhana racer, that's just what the company was given

time-read
8 mins  |
December 2021
Remote control
Racecar Engineering

Remote control

Called variously ‘virtual garages’, ‘mission control’ or ‘race support rooms’ is the future of race engineering sitting in the warm back at HQ?

time-read
10+ mins  |
December 2021