Cobbs Mill Tangy Gas Engine
Stationary Engine|September 2017

This large Tangye gas engine located at Cobbs Mill, Sayers Common, West Sussex was first featured in May 2005 (No 374) issue of Stationary Engine.

 
Richard Amos
Cobbs Mill Tangy Gas Engine

The engine, which carries the serial number 12330, is believed to have been built around 1908 and was supplied from a gas producer plant built by the National Gas Engine Co. It is an ‘X’ type, size K with a 13 inch bore and considered to be about 30-40 hp. It is ignitor-fired, with L/T trip magneto and is thought to have last run in the 1960s when the mill went out of use.

The engine and gas plant are believed to have been installed secondhand by J W Holloway and Sons, Engineers, of Shoreham by Sea, Sussex, as the engine bears their plate; it replaced a steam engine. The engine drove the mill machinery at times of peak demand or when the water in the leat was insufficient to power the waterwheel.

This story is from the September 2017 edition of Stationary Engine.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

This story is from the September 2017 edition of Stationary Engine.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

MORE STORIES FROM STATIONARY ENGINEView All
Lister Conundrum?
Stationary Engine

Lister Conundrum?

Back in 2016 a discussion took place on Fozzer’s Forum about early Lister J type engines; as I have a very early Lister 2 ½ hp, I was interested and took part in the discussion. I have always had an interest in Lister engines, having nine in my shed, all of which are restored, except a spec 52 Lister A. I had never delved into the history of these engines as I considered that just about everything was known about them, through the work done by the late David Edgington, and information is readily available.

time-read
5 mins  |
April 2018
Rogues' Gallery Pt2
Stationary Engine

Rogues' Gallery Pt2

Some engines have remained unidentified for a number of years – unless YOU, the reader, know differently….!

time-read
1 min  |
April 2018
Coventry Victor Stationary/Marine Engines
Stationary Engine

Coventry Victor Stationary/Marine Engines

Following a comment in the January edition of Stationary Engine, that Coventry Victor engines were rarely seen on our rally fields and as I have a liking for these engines (and flat twins), I have put together a short article based on my three examples.

time-read
2 mins  |
April 2018
Turner Manufacturing Co- Simplicity Engines
Stationary Engine

Turner Manufacturing Co- Simplicity Engines

Having seen the little vertical Simplicity engine on the front cover of the October 2017 issue of Stationary Engine, where the name Western Malleable & Gray Iron Company, Milwaukee cast into the flywheel rim, is clearly legible, I decided the manufacturer required further investigation

time-read
1 min  |
April 2018
Christmas Crank-Ups Riccall
Stationary Engine

Christmas Crank-Ups Riccall

Winter crank-ups and open days have become increasingly popular in recent years and one of the biggest I have ever attended was held in the village of Riccall, near York on Saturday 30th December.

time-read
2 mins  |
April 2018
Petter Standard Oil Engine
Stationary Engine

Petter Standard Oil Engine

I am sure that the Petter Handyman engine will be a familiar sight to many engine enthusiasts, but the same cannot be said for the ‘Petter Standard Oil Engine’; the engine on which the Handyman engine was designed.

time-read
1 min  |
April 2018
Clarendon Rally- Australia
Stationary Engine

Clarendon Rally- Australia

Whilst on a recent trip to visit my family in Australia I took the opportunity to visit, with my son, the well known Clarendon Classic, Machinery, Truck and Hobby Show, which has been held for many years at the Hawkesbury Showgrounds, on Racecourse road, Clarendon, NSW on the weekend of the 16/17th September 2017.

time-read
1 min  |
April 2018
Blackstone Compressors
Stationary Engine

Blackstone Compressors

Blackstone Compressors

time-read
1 min  |
April 2018
The Warwick DC Generating Set
Stationary Engine

The Warwick DC Generating Set

I was recently invited to inspect a small generating set belonging to Colin Williams from Horsham in Sussex.

time-read
2 mins  |
January 2018
Unusual Lister Engines
Stationary Engine

Unusual Lister Engines

With the West Oxon Steam Rally 2017 drawing out a large collection of Lister Engines, here are a few of the more unusual models seen.

time-read
2 mins  |
January 2018