Yes, I’m back again with yet another slightly unusual Stuart Turner story; this time it is a fairly early P4Y, my 4th P4 in all.
The P4 engine was introduced in 1928 and for a few months production ran alongside the P3; presumably this was done until stocks of P3 castings were used up. The P4 was basically a complete redesign with features such as large ball main bearings and big-end roller bearing; it was designed to be a more robust engine than the P3 in all aspects.
This story is from the May 2017 edition of Stationary Engine.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the May 2017 edition of Stationary Engine.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber? Sign In
Lister Conundrum?
Back in 2016 a discussion took place on Fozzer’s Forum about early Lister J type engines; as I have a very early Lister 2 ½ hp, I was interested and took part in the discussion. I have always had an interest in Lister engines, having nine in my shed, all of which are restored, except a spec 52 Lister A. I had never delved into the history of these engines as I considered that just about everything was known about them, through the work done by the late David Edgington, and information is readily available.
Rogues' Gallery Pt2
Some engines have remained unidentified for a number of years – unless YOU, the reader, know differently….!
Coventry Victor Stationary/Marine Engines
Following a comment in the January edition of Stationary Engine, that Coventry Victor engines were rarely seen on our rally fields and as I have a liking for these engines (and flat twins), I have put together a short article based on my three examples.
Turner Manufacturing Co- Simplicity Engines
Having seen the little vertical Simplicity engine on the front cover of the October 2017 issue of Stationary Engine, where the name Western Malleable & Gray Iron Company, Milwaukee cast into the flywheel rim, is clearly legible, I decided the manufacturer required further investigation
Christmas Crank-Ups Riccall
Winter crank-ups and open days have become increasingly popular in recent years and one of the biggest I have ever attended was held in the village of Riccall, near York on Saturday 30th December.
Petter Standard Oil Engine
I am sure that the Petter Handyman engine will be a familiar sight to many engine enthusiasts, but the same cannot be said for the ‘Petter Standard Oil Engine’; the engine on which the Handyman engine was designed.
Clarendon Rally- Australia
Whilst on a recent trip to visit my family in Australia I took the opportunity to visit, with my son, the well known Clarendon Classic, Machinery, Truck and Hobby Show, which has been held for many years at the Hawkesbury Showgrounds, on Racecourse road, Clarendon, NSW on the weekend of the 16/17th September 2017.
Blackstone Compressors
Blackstone Compressors
The Warwick DC Generating Set
I was recently invited to inspect a small generating set belonging to Colin Williams from Horsham in Sussex.
Unusual Lister Engines
With the West Oxon Steam Rally 2017 drawing out a large collection of Lister Engines, here are a few of the more unusual models seen.
