Faced with the threat of rival teams running high-power turbo engines in the early ’80s Williams had to think outside the box. Sadly, its six-wheeled racers never saw F1 action. Racecar re-evaluates this radical concept
It’s among the most successful of all F1 teams, yet Williams has never really been known for its obviously ground breaking designs. Instead, the team, founded by Frank Williams and Patrick Head in 1977, usually managed to improve and perfect an existing design or idea, though many times using novel ideas to achieve this behind the scenes.
A great example of this was the FW07 raced by the team in successive evolutions between 1979 and 1981. It adopted the ground effect aerodynamics pioneered by Team Lotus but coupled with a much stronger chassis capable of handling the high aerodynamic loads attained. This resulted in the 1980 drivers’ championship for Alan Jones and back-to-back constructors’ titles in 1980 and 1981. Ironically, the Williams FW07 was so good that many rival Formula 1 teams copied its design.
Despite the success of the FW07 chief engineer Patrick Head and his aerodynamicist Frank Dernie recognised a serious threat on the horizon; the advent of the hugely powerful and ever more reliable turbo engines. In 1981 these were the preserve of works teams like Renault and Ferrari, so Williams had no option but to carry on with the readily available Ford Cosworth DFV V8. But a superior grasp of aerodynamics and chassis design would not be sufficient to bridge the estimated 200bhp deficit of Williams’ naturally aspirated engine. Especially considering ever-stricter regulations aimed at pegging back downforce to reduce cornering speeds. With no turbo engine supply deal insight, Williams opted to, uncharacteristically, explore a solution that was well outside the box.
هذه القصة مأخوذة من طبعة December 2017 من Racecar Engineering.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك ? تسجيل الدخول
هذه القصة مأخوذة من طبعة December 2017 من Racecar Engineering.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك? تسجيل الدخول
Talk the torque
More thoughts on in-wheel motors and their effects on twisting force
Rolling about
An explanation of the limitations of a previous load transfer article, bringing jacking forces into the mix
F1 breaks schedule records
The FIA has confirmed no fewer than 23 races on the 2022 Formula 1 World Championship schedule, the highest number of grands prix ever to be held in a single season, and that has led to criticism from some teams that will be on the road for eight months.
Under pressure
Toyota may have finished first and second at Le Mans this year, but the effort required to overcome a fuel delivery problem and finish with both cars was Herculean
Physics at work
Dutch company, Intrax, offers Racecar Engineering an insight into the technologies it employs to optimise its suspension products
Williams' 2030 ambition
Williams Racing has committed to becoming climate positive by 2030 as part of an all-new sustainability strategy.
Diff'rent strokes
Racecar looks at the different types of mechanical differential, their benefits and limitations
Das Boot
A curious Twitter exchange fired up a unique, hydrogen-powered, cross-country project that will contest the Baja 1000 in November 2022
Air born
Every racecar engineer's dream is a blank sheet of paper design. When Hoonigan and Subaru approached Vermont Sportscars about building the next generation of Gymkhana racer, that's just what the company was given
Remote control
Called variously ‘virtual garages’, ‘mission control’ or ‘race support rooms’ is the future of race engineering sitting in the warm back at HQ?