Busting Pet Myths!
ET Polymers|Oct - Nov 2017

Extensive Testing of Pet and Pet Packaging Has Repeatedly Shown It to Be Safe. That Is the Simple, Irrefutable Truth, Based on Science and Facts.

Prakash Chandra Joshi
Busting Pet Myths!

“The eye sees only what the mind is prepared to comprehend”, goes a popular saying. Terse as it is, there’s a lot of truth in this maxim. We all live with many (cognitive) biases in our minds. Truth is that we like to believe facts that reiterate our preconceived conclusions, rather than challenge them. It’s just more comforting for us.

Nowhere does this hold truer than when it comes to misconceptions about PET plastics. Today, there is a lot of misinformation on plastics, especially PET plastics. I am certain that you have read about the hazards of using plastics. No doubt you would also have received some, endorsed-by-scientists, kind of videos on the dangers of keeping food in plastics. If you have allowed these narratives to convince you that PET plastic is harmful, even considering facts and evidences to the contrary, then you have fallen for, what is commonly called, the confirmation bias.

The scientific truth is that PET is an inert plastic, and does not leach harmful materials into its contents, either when beverage (or food) is stored unopened, or when the containers or bottles are refilled or frozen. It is known for its clarity, making it a lightweight, non-breakable alternative to glass and other plastics.

The material has been thoroughly reviewed and approved as safe for direct contact with foods, beverages and pharmaceuticals by the WHO, USFDA, Health Canada, the European Food Safety Authority and other health-safety agencies. What’s more is that all the tests have been validated under Indian conditions as per BIS standard. PET containers have been safely used by consumers around the world for more than 35 years without any known adverse effects. Extensive testing of PET and PET packaging has repeatedly shown it to be safe. That is the simple, irrefutable truth, based on science and facts.

This story is from the Oct - Nov 2017 edition of ET Polymers.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

This story is from the Oct - Nov 2017 edition of ET Polymers.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

MORE STORIES FROM ET POLYMERSView All
The Changing Face Of Mobility
ET Polymers

The Changing Face Of Mobility

A brief look at the salient points on how plastics is transforming automotive manufacturing

time-read
6 mins  |
Aug-Sept 2021
Nippon Launches Weatherbond PRO
ET Polymers

Nippon Launches Weatherbond PRO

Nippon Paint (India) Private Limited (Decorative Division) Asia’s leading paint manufacturer launched the advertising campaign for Weatherbond PRO – the high durable exterior emulsion offering up to 15 years of protection against extreme climate conditions like prolonged exposure to heat, and heavy spells of rain. Based on extensive research done by Nippon Paint’s R&D team, this product was developed for customers who need advance protection for their home exteriors in terms of extended fresh look, strong waterproofing and protection from Algal and Fungal attacks.

time-read
1 min  |
Aug-Sept 2021
Low-Pressure Molding Adopted Across Industries
ET Polymers

Low-Pressure Molding Adopted Across Industries

Henkel’s Technomelt Low-Pressure Molding technology meets demands for encapsulation of electronics and medical components

time-read
4 mins  |
Aug-Sept 2021
TotalEnergies and Jindal Films To introduce Certified Circular Polypropylene
ET Polymers

TotalEnergies and Jindal Films To introduce Certified Circular Polypropylene

TotalEnergies and Jindal Films have joined forces to produce more sustainable flexible food packaging and labels. Using advanced recycling technology from Plastic Energy, TotalEnergies will supply Jindal Films with Certified Circular Polypropylene produced from postconsumer plastic waste. This new value-chain collaboration will divert plastic waste currently destined for incineration and landfill because it is too complex to recycle through existing schemes.

time-read
2 mins  |
Aug-Sept 2021
Lenzing's VEOCEL™ Brand Launches Hydrophobic Lyocell Fibres With Dry Technology
ET Polymers

Lenzing's VEOCEL™ Brand Launches Hydrophobic Lyocell Fibres With Dry Technology

In its quest to drive greater sustainability in the personal care and hygiene industry, the VEOCEL™ brand has launched a new offering: VEOCEL™ branded lyocell fibres with dry technology which are naturally smooth and gentle on skin, ensuring comfort for sensitive skin. Absorbent hygiene products are an indispensable part of many consumers’ lives and are relied upon daily. As these are essential items, it is important that they should offer maximum comfort and relief to the user. This is demonstrated by the new VEOCEL™ branded lyocell fibres which have the capacity to provide a high level of comfort, softness and dryness, when applied in these types of products.

time-read
1 min  |
Aug-Sept 2021
Simulating Injection Molding for Efficiency
ET Polymers

Simulating Injection Molding for Efficiency

Producing high-quality, plastic injection-moulded parts more quickly and cost-effectively has become a critical factor for manufacturing success in today’s global market. Instead of engaging in slow, expensive prototype iterations and test cycles to satisfy manufacturing requirements, designers, mold makers, and manufacturing professionals can leverage SOLIDWORKS® Plastics mold-filling simulation software to optimise parts for manufacturability, refine tooling to improve quality and shorten cycle times to reduce manufacturing costs

time-read
10 mins  |
Aug-Sept 2021
Leveraging 3D Printing for optimised Injection Molds
ET Polymers

Leveraging 3D Printing for optimised Injection Molds

A guideline from Formlabs on the factors to consider before using stereolithography (SLA) 3D printed molds in the injection molding process to lower costs, reduce lead times, and bring better products to market

time-read
8 mins  |
Aug-Sept 2021
iglidur I151 for FDA-compliant, Detectable, Wear Resistant Parts In Food Technology
ET Polymers

iglidur I151 for FDA-compliant, Detectable, Wear Resistant Parts In Food Technology

igus has developed a blue, food-compatible tribo-filament for cost effective 3D printing of special parts. iglidur I151 is blue, prints easily, and has an optimal coefficient of friction and wear. The new tribo-filament is a refinement of the easy-to-machine igus iglidur I150 all-rounder filament. Because it is blue, it can be used to manufacture special parts that are optically detectable in the food industry. Food compatibility according to the FDA and to EU Regulation 10/2011 also qualifies the high-performance polymer for use in the food and cosmetics industries.

time-read
1 min  |
Aug-Sept 2021
Exceptional Warpage Control
ET Polymers

Exceptional Warpage Control

SABIC’s new LNP™ THERMOCOMP™ compounds deliver exceptional warpage control

time-read
5 mins  |
Aug-Sept 2021
Digital Transformation in Plastics
ET Polymers

Digital Transformation in Plastics

Automation in the plastics industry is becoming more complex, the pace of innovation is accelerating, and competitive pressure is increasing. Open and safe automation makes it possible to combine traditional mechanical engineering with the latest Industry 4.0 technologies – Lets take a look at how Industry 4.0 is transforming the plastics sector

time-read
8 mins  |
Aug-Sept 2021