Honda ST1100 Pan European part 2- Squeaking Pan
Classic Motorcycle Mechanics|March 2020
Something’s going ‘squeak’ in Allen’s Pan… wonder what it is?
ALLEN MILLYARD
Honda ST1100 Pan European part 2- Squeaking Pan

My Pan Europeanstarted to make an intermittent squeak from the engine, but it didn’t bother me too much at first because I’ve had a similar noise before and it turned out to be the heat shields on the exhaust manifolds flexing from cracks around the mounting screws.

A few days passed and the noise was getting louder and more persistent, so I removed the side covers from the fairing, but could see the exhaust heat shields were fine and the noise seemed to be coming from the front of the engine. My Pan European has done 88,000 miles so I thought maybe it could be one of the cambelt tensioner pulley bearings starting to fail, so I removed the upper cambelt covers from each cylinder head and had a look in with a torch. The belt seemed ok, but when I re-started the engine the noise was much louder with the covers removed, and I could see a bit of Kevlar cord flapping around on the cambelt!

I stopped the engine and cleared space for a big strip-down to investigate further. I disconnected the battery first because I didn’t want any chance of inadvertently cranking the engine while the cambelt was removed, and then proceeded to remove the belly-pan and lower fairing panels. I had fitted new stainless steel fairing screws a few years ago so this was a straightforward process. I replaced the screws because the standard steel screws can rust in place, proving difficult to remove. With the lower fairing removed I drained out the coolant and removed the radiator, revealing a large plastic cover on the front of the engine that covers the cambelt.

Bu hikaye Classic Motorcycle Mechanics dergisinin March 2020 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye Classic Motorcycle Mechanics dergisinin March 2020 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

CLASSIC MOTORCYCLE MECHANICS DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 dak  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 dak  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 dak  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 dak  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 dak  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 dak  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 dak  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 dak  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 dak  |
July 2021