Fitting The Motherboard Into The Case
The Complete Build Your Own PC Manual|January 2021
If you have been following the steps of the build so far, you should now be in a position to fit the motherboard, along with the fitted CPU, cooler and RAM, into your prepared case. This not only involves screwing the board into place but also correctly connecting all the case controls like the power switch, HDD LED, front USB ports etc.. Your motherboard will also have been supplied with a back plate.
Fitting The Motherboard Into The Case

Installing the Board

This is the part of the build where your PC starts to look like a PC and not just a pile of components. Always handle the motherboard by holding the edges, not the contacts.

STEP 1 Take the back plate, which is punched with holes that match the external inputs on the motherboard back panel and press it into the rectangular hole in the back of the case. The coloured or labelled side faces out, with the padded or tabbed side facing in. The padding or tabs will help to ensure a secure fit against the back panel.

STEP 2 You obviously have to ensure that the plate is inserted the right way up, usually with the mouse and keyboard connections nearest the top of the case, and the on-board audio ports towards the bottom. Check on your specific motherboard just in case this is different. The back plate will have small protrusions or clips around the edge to help it attach to the rim of the hole.

STEP 3 Lay the case down flat if it isn’t already and lift the motherboard carefully in. Whenever you are going to touch the motherboard, especially the exposed connections on the back, make sure you are wearing an anti-static wristband and clip or that you discharge any built up static electricity in your body by touching a large metal object, like a desk.

Bu hikaye The Complete Build Your Own PC Manual dergisinin January 2021 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye The Complete Build Your Own PC Manual dergisinin January 2021 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

THE COMPLETE BUILD YOUR OWN PC MANUAL DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
Do You Need An Optical Drive?
The Complete Build Your Own PC Manual

Do You Need An Optical Drive?

Building a PC a few years ago without an optical drive would have seemed like madness. It would have made using the PC fairly difficult as most software was supplied on discs and Internet speeds were not really up to the task of downloading large files such as games. Nowadays, almost everything you might want to install on your PC can be bought electronically and discs are becoming somewhat obsolete. So do you actually need to install a CD/DVD drive?

time-read
2 dak  |
January 2021
The Right RAM
The Complete Build Your Own PC Manual

The Right RAM

A fast and easy way to add a performance boost to your PC is to install high quality, fast RAM (Random Access Memory). DDR4 is the latest variation of PC memory and is the fastest and most efficient yet but just like many other components in your build, RAM isn’t quite as simple as it might at first seem. Different motherboards support different maximum amounts, as do different operating systems and it is available in many different speeds and configurations.

time-read
5 dak  |
January 2021
Expansion Cards and Extras
The Complete Build Your Own PC Manual

Expansion Cards and Extras

Expansion cards are technically any printed circuit board that can be added to the system to add functionality or features. This means that a graphics card is an expansion card, albeit a fairly fancy one, and you can run a PC without including one, assuming the motherboard has on-board graphics. Here we will look at some of the other expansion card options you may want or need in your build.

time-read
2 dak  |
January 2021
Fitting The Motherboard Into The Case
The Complete Build Your Own PC Manual

Fitting The Motherboard Into The Case

If you have been following the steps of the build so far, you should now be in a position to fit the motherboard, along with the fitted CPU, cooler and RAM, into your prepared case. This not only involves screwing the board into place but also correctly connecting all the case controls like the power switch, HDD LED, front USB ports etc.. Your motherboard will also have been supplied with a back plate.

time-read
4 dak  |
January 2021
Troubleshooting Your Build
The Complete Build Your Own PC Manual

Troubleshooting Your Build

Hopefully, if you have followed all of our instructions carefully, you won’t have any problems during the first boot of your new PC. However, problems can and do occur, even for experienced builders. The difference between a beginner and an experienced builder is the ability to solve problems and troubleshoot the PC build. If you have a problem with your computer, it will likely be one of these.

time-read
5 dak  |
January 2021
Preparing the Case
The Complete Build Your Own PC Manual

Preparing the Case

Choosing a case used to be almost an afterthought when building a custom PC. One grey box was much the same as another grey box. Thankfully the days of grey boxes are well and truly over and our choice of PC case ranges from tiny media boxes designed to go next to a TV, to bespoke glass towers aimed at those who want to show off their perfectly co-ordinated components. However, whichever case you choose, some preparation is needed before beginning your build.

time-read
2 dak  |
January 2021
Upgrading to Windows 10 from Windows 7 or 8.1
The Complete Build Your Own PC Manual

Upgrading to Windows 10 from Windows 7 or 8.1

If you have an existing copy of Windows 7 or 8.1 on disc, not being used on another active PC, you can use this for the initial install of Windows and then upgrade to Windows 10 afterwards or at a later date. You have missed the deadline for the free upgrade to 10 but it is quite likely that Microsoft will reopen that offer, or run similar discounted offers, for their new OS in the near future. This guide assumes you are taking this route to Windows 10, rather than a fresh install.

time-read
6 dak  |
January 2021
Need More Power?
The Complete Build Your Own PC Manual

Need More Power?

The role of a PC power supply unit is to convert the AC electric power that comes from the mains to the DC power that the computer requires. However, it can do much more than that. A good quality power supply can make your system more efficient, stable and reliable. The power supply is often the first component to fail in an older system, so making sure you understand the full role of the PSU in your build is very important.

time-read
5 dak  |
January 2021
Navigating Your Motherboard
The Complete Build Your Own PC Manual

Navigating Your Motherboard

We will be referring to specific parts of the motherboard in detail as we work our way through the build but for now it is a good idea to familiarise yourself with how a standard motherboard is laid out, where the sockets and ports will be, and what they look like. There will be some slight variations in location of sockets and features between different motherboards but most will follow this general layout pattern.

time-read
6 dak  |
January 2021
Final Checks and First Boot
The Complete Build Your Own PC Manual

Final Checks and First Boot

If you have followed all of the build steps thus far, you should now be at the point where the first boot up is looming. Before you do, it is worth going back and checking that everything is ready, all cables are connected and everything is looking good. First boot doesn’t mean that you can’t go back and change things later but you can avoid problems by doing a few simple checks.

time-read
5 dak  |
January 2021