A Small Shop Sand Blasting Cabinet
Model Engineers' Workshop|February 2020
Graham Meek makes a versatile cabinet with a modest footprint and a ball joint for the gun which maximises the internal space available.
Graham Meek
A Small Shop Sand Blasting Cabinet

I would be the first to admit there are quite a number of Sand Blasting cabinets available commercially, so why write an article on making one? Well for one thing most of these manufactured cabinets have a high airflow requirement. The smallest cabinet I came across had an airflow requirement that was double the capacity of my current shop compressor. Having to purchase a new compressor and the sand blasting cabinet puts a big dent in the shop budget. There is also the fact that in most shops this cabinet will get only occasional usage and it can take up an appreciable amount of space on a bench or if it is free-standing. The desire to sand or more correctly shot blast small brass fabrications to make them represent castings became more urgent when I started making a Fiat 702 Tractor and a Clayton Steam Tractor. I first experimented with the shot pick-up attachment for my airline and the first cabinet was an old plywood sided box. A piece of Acrylic sheet across the top and a hole in each side to put my hands through gave the rudimentary, if not very elegant cabinet. The shop vacuum was also attached in an attempt to evacuate the dust caused during the process. I also took the precaution of wearing a proper face mask especially for fine dust, one can never be too careful. Also the first trials were conducted outdoors as an added safety measure.

Bu hikaye Model Engineers' Workshop dergisinin February 2020 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye Model Engineers' Workshop dergisinin February 2020 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

MODEL ENGINEERS' WORKSHOP DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 dak  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 dak  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 dak  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 dak  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 dak  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 dak  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 dak  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 dak  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 dak  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 dak  |
March 2020