Rubbing Out Arm R Seal & Questions
Woodworker West|January.- February 2019

Rubbing Out Arm R Seal & Questions

David Marks
Rubbing Out Arm R Seal & Questions

RUBBING OUT ARM R SEAL

While I do lots of rubbing out techniques on lacquer, my approach to rubbing out General Finishes’ Arm R Seal is different. Lacquer is a much harder (or should I say brittle) finish and behaves differently. You can wet sand, and polish or buff lacquer with excellent results, because each layer melts into the previous one.

Arm-R-Seal is a family of urethane resin topcoats, which produce a durable and long-lasting finish. Oil-based, they are essentially a thinned down varnish, designed to be wiped on and wiped off. I always build all of my coats of finish with gloss, no matter if it is lacquer, varnish, oil, or polyurethane. In some cases when I want a satin finish, I will apply a coat of satin as the final coat. In other cases, I will use rubbing out techniques to dull down the finish.

My approach to Arm R Seal is to build all of the coats with gloss, wiping it on, wiping it off, then letting it dry overnight. The next day, I rub the surface with 0000 steel wool, blow the dust off, and apply another coat. My goal is to have the last coat looking perfect, after I finish carefully wiping it off and then buffing it with a clean, soft, cloth. Sometimes, Murphy's Law gets in the way, and things do not come out looking so great. If I have something in the finish that looks like it needs to be flattened, for example some specs of dust or maybe a hair from a brush or some dried resin, then I can usually level it with some very light sanding with 600 grit sanding paper.

From there, I can rub the entire surface with 0000 steel wool to blend the sheen and make it uniform. After that, I would apply another coat of gloss oil to fill in any small scratches from the 600 grit sandpaper and let that dry overnight. If this looks good, then the finish is complete.

Bu hikaye Woodworker West dergisinin January.- February 2019 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye Woodworker West dergisinin January.- February 2019 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

WOODWORKER WEST DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
Education: 2022 Design Emphasis
Woodworker West

Education: 2022 Design Emphasis

The next generation of furniture designers were on display at the 2022 Design Emphasis, the biennial student design competition exhibition held in conjunction with last summer’s International Woodworking Fair IWF) in Atlanta, GA.

time-read
1 min  |
November - December 2022
Profile: Leo Litto
Woodworker West

Profile: Leo Litto

Leo Litto of Austin, TX is an award-winning maker of heirloom quality furniture. Here is Leo's story, in his own words:

time-read
4 dak  |
November - December 2022
Tools & Techniques
Woodworker West

Tools & Techniques

It’s All Problems

time-read
10 dak  |
November - December 2022
Profile: John P. McCormack
Woodworker West

Profile: John P. McCormack

As the Port Townsend School of Woodworking welcomes master woodworkers from around the Northwest to their November Woodworking Show, we caught up with its newest faculty member, John P. McCormack. Here is John’s story in his own words:

time-read
3 dak  |
November - December 2019
From David Marks Studio- Patina Applications & Questions
Woodworker West

From David Marks Studio- Patina Applications & Questions

For years, many of you have read my discussions about gilding and chemical patination techniques, but are unsure about its application to your own work. I'd like to share a recent email from Sandra Walkin of Louisiana, who took my Gilding & Chemical & Patination class and a 2-day private class in 2015:

time-read
4 dak  |
November - December 2019
Education: NW Woodworking Studio
Woodworker West

Education: NW Woodworking Studio

Education: NW Woodworking Studio

time-read
1 min  |
November - December 2019
Tools & Techniques Small Shop Design
Woodworker West

Tools & Techniques Small Shop Design

Tools & Techniques Small Shop Design

time-read
7 dak  |
March-April, 2017
From David Marks Studio Answering Reader's Questions
Woodworker West

From David Marks Studio Answering Reader's Questions

From David Marks Studio Answering Reader's Questions

time-read
5 dak  |
March-April, 2017
Profile: Marco Cecala
Woodworker West

Profile: Marco Cecala

Marco Cecala of Phoenix, AZ is a talented craftsman, beginning a transition into full-time furnituremaking. Here is Marco’s story, in his own words:

time-read
4 dak  |
January-February, 2017
Turning Topics AAW Members' Exhibition
Woodworker West

Turning Topics AAW Members' Exhibition

Continuum

time-read
1 min  |
July - August, 2019