Big Engine Installations
Model Airplane News|October 2019

Strengthening your ARF’s firewall

John Glezellis
Big Engine Installations

Over the years, I’ve been asked questions by modelers who fly smaller glow-powered models and wanted to step up to giant scale. They often feel intimidated by the building and assembling required for the larger airplanes, especially when it comes to installing a gasoline engine. This month, let’s talk about gasoline engine installations.

Proper Adhesives

Using the correct glue for any application is important, and when working with gas models, I highly recommend 30-minute epoxy. This ensures a strong bond between the firewall and the engine-box structure. Always be sure to mix two-part epoxy properly. If you mix in too much hardener, the epoxy may set too quickly and won’t produce a strong bond. On the other hand, if you use too much resin, the epoxy may not cure at all. Most epoxy glues require a 50/50 mix of resin and hardener (part A and part B); but to be safe, always check the instructions. There are some brands that require other mixing ratios to cure properly. Mix up a small test batch first to see how long your brand takes to fully cure. I have seen airplanes crash because their firewall glue joints failed in flight. Do it right, and don’t guess!

Firewall Reinforcement

Many ARF models today include factoryinstalled firewalls, which leaves little to do during the building process. Although they may seem plenty strong as designed, I like to add reinforcement to key high-stress areas, especially the firewall.

Bu hikaye Model Airplane News dergisinin October 2019 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye Model Airplane News dergisinin October 2019 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

MODEL AIRPLANE NEWS DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
Model Airplane News

Legend Hobby / Seagull Models - Cessna Grand Caravan 208

The Cessna Grand Caravan 208 is a legend in aviation circles. A single engine utility aircraft that punches up with capabilities that rival many twin engine aircraft in its class. Its seemingly simple configuration belies its near extreme utility.

time-read
8 dak  |
January 2022
Model Airplane News

PROPER CG LOCATION FOR AEROBATICS

If you are getting into aerobatics and are starting to perform more advanced maneuvers, it is time to discuss ways you can not only become a better pilot, but how you can also improve the flight characteristics of your airplanes.

time-read
5 dak  |
January 2022
Legend Hobby 13-Foot L-19 Bird Dog/ Cessna O-1
Model Airplane News

Legend Hobby 13-Foot L-19 Bird Dog/ Cessna O-1

This famous multi-mission single engine observation aircraft served from 1950-1974. From calling out target locations to providing intel/recon information, the Bird Dog was a valued asset in both the Korean War and Vietnam.

time-read
1 min  |
January 2022
EARN YOUR WINGS
Model Airplane News

EARN YOUR WINGS

10 Tips for First-Flight Success

time-read
6 dak  |
January 2022
Old School Model Works Fifty Six
Model Airplane News

Old School Model Works Fifty Six

The Fifty Six takes its design cues from the original .09- to .15-size Carl Goldberg Falcon 56 of the 1960s. Reworked to incorporate modern, lasercut techniques to make kit building better than ever.

time-read
1 min  |
January 2022
Model Airplane News

FLYING TWINS Multi-engine warbirds made easy

Let’s face it, there’s just something extra special about twin-engine RC aircraft. Most modelers stop what they’re doing when a twin fires up on the flightline.

time-read
6 dak  |
January 2022
HOW TO BALANCE PROPELLERS
Model Airplane News

HOW TO BALANCE PROPELLERS

Four easy steps to increase performance and reduce vibration

time-read
5 dak  |
January 2022
PRODUCT REVIEW: RC PLANE STANDS BENCHTOP MODEL
Model Airplane News

PRODUCT REVIEW: RC PLANE STANDS BENCHTOP MODEL

I’m a sucker for shop stuff. I buy tools I will probably never use just because they are cool, or I might need to use them someday. When Glen from RC Plane Stands reached out about a review, however, I knew as soon as I browsed their website that I would be receiving something I would use a lot, maybe even daily.

time-read
2 dak  |
January 2022
Model Airplane News

SPIRIT OF RHINEBECK AWARD WINNER

A close up of Norman Malinowski’s 1/3-scale Albatros

time-read
3 dak  |
January 2022
CENTER OF GRAVITY BASICS
Model Airplane News

CENTER OF GRAVITY BASICS

The secret to a plane that flies well

time-read
6 dak  |
July 2021