IS LIQUID SANDPAPER LURKING IN YOUR MACHINE?
MACHINERY LUBRICATION INDIA|March - April 2024
Certain subjects merit emphasis and should be frequently revisited. Contamination control is one such subject.
IS LIQUID SANDPAPER LURKING IN YOUR MACHINE?

Particles are like a virus, invisible to the naked eye but packing a powerful punch. The most destructive particles are typically less than ten microns in size (for comparison, a thousandth of an inch is roughly 25 microns).

The microscopic size of these destructive particles makes them hard to measure and count. Over time, they keep accumulating in the oil. Even in relatively high concentrations, their presence can remain hidden from view and undetectable to the touch. This explains why they are often referred to as "ghost riders".

Think of ultrafine sandpaper at 1000 grit. The size of abrasive particles that are bound to the paper range from 6.8 - 9.3 microns in diameter. Lubricants with high populations of suspended particles of that size range effectively form a medium with the potential to exact considerable harm to the machine.

Compared to larger particles, small silt-size particles easily evade even the finest filters, and larger particles are often quickly crushed into many smaller particles (comminution). As shafts rotate or slide against opposing surfaces (bearings, seals, gears, pistons, cams), microscopic excavations occur (dents, gouges, scratch marks), producing even more particles. Over time, the concentration of these small particles forms a medium that is functionally equivalent to liquid sandpaper.

Think of a belt sander. Even fitted with fine 1000-grit paper, it can polish away vast amounts of metal in short order. Now imagine a heavily loaded shaft rotating at high speed against a journal bearing lubricated with contaminated oil. It's the same thing, and the shaft and bearing get polished. This is called three-body abrasion.

The Causes of Liquid Sandpaper

Bu hikaye MACHINERY LUBRICATION INDIA dergisinin March - April 2024 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

Bu hikaye MACHINERY LUBRICATION INDIA dergisinin March - April 2024 sayısından alınmıştır.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

MACHINERY LUBRICATION INDIA DERGISINDEN DAHA FAZLA HIKAYETümünü görüntüle
The Secrets For Implementing A Clean lubricant Program
MACHINERY LUBRICATION INDIA

The Secrets For Implementing A Clean lubricant Program

If you could find an investment that guaranteed a return 40 times greater than your initial investment, you probably wouldn't pass it up.

time-read
4 dak  |
March - April 2024
MAINTAIN? REPAIR? REPLACE?
MACHINERY LUBRICATION INDIA

MAINTAIN? REPAIR? REPLACE?

When considering the life of any asset, the question arises: what types of interventions should be planned to keep it operating or to restore operation in the event of its failure?

time-read
4 dak  |
March - April 2024
Engineering Reports Should Be Like Bad Movies
MACHINERY LUBRICATION INDIA

Engineering Reports Should Be Like Bad Movies

I'm frequently asked to review engineering reports, and I'm continually baffled by how many engineers want to take their readers on a journey instead of getting to the point.

time-read
7 dak  |
March - April 2024
WHY SCHEDULED OIL CHANGES AREN'T ENOUGH TO MITIGATE LUBRICANT CONTAMINATION
MACHINERY LUBRICATION INDIA

WHY SCHEDULED OIL CHANGES AREN'T ENOUGH TO MITIGATE LUBRICANT CONTAMINATION

There are few problems more insidious or damaging to large industrial machinery than contaminated lubricant.

time-read
4 dak  |
March - April 2024
LUBRICATION CONTAMINATION PREVENTION
MACHINERY LUBRICATION INDIA

LUBRICATION CONTAMINATION PREVENTION

How many articles have you read, or seminars listened to, that tout the value of contamination control? If you are like me, they number in the hundreds—if not thousands. One thing about these articles and seminars that bothers me is the word “control”.

time-read
6 dak  |
March - April 2024
LUBRICANT CONTAMINATION PREVENTION AND MITIGATION: A Guide For Maintenance Professionals
MACHINERY LUBRICATION INDIA

LUBRICANT CONTAMINATION PREVENTION AND MITIGATION: A Guide For Maintenance Professionals

Lubricants are essential for the smooth and efficient operation of many types of machinery, from engines and turbines to gears and bearings.

time-read
5 dak  |
March - April 2024
TASK-BASED TRAINING | INSPECTING A SINGLE-POINT LUBRICATOR
MACHINERY LUBRICATION INDIA

TASK-BASED TRAINING | INSPECTING A SINGLE-POINT LUBRICATOR

A single-point lubricator is a device engineered to attach to a single unit to regularly and automatically deliver a small amount of clean grease or lubricating oil to a specific area.

time-read
3 dak  |
March - April 2024
TOP LEADERSHIP FOCUSES FOR IMPROVED RELIABILITY AND COST REDUCTION
MACHINERY LUBRICATION INDIA

TOP LEADERSHIP FOCUSES FOR IMPROVED RELIABILITY AND COST REDUCTION

Here’s a scenario that may sound eerily familiar – you have a new reliability initiative.

time-read
4 dak  |
March - April 2024
4 KEY ELEMENTS FOR INTERPRETING AN OIL ANALYSIS REPORT
MACHINERY LUBRICATION INDIA

4 KEY ELEMENTS FOR INTERPRETING AN OIL ANALYSIS REPORT

Years ago, a customer came into my office, visibly upset. He had just received his second oil analysis report for one of his Caterpillar gas engines.

time-read
4 dak  |
March - April 2024
ASTM ENHANCEMENTS TO MICROSCOPIC PARTICLE IDENTIFICATION AND DOCUMENTATION
MACHINERY LUBRICATION INDIA

ASTM ENHANCEMENTS TO MICROSCOPIC PARTICLE IDENTIFICATION AND DOCUMENTATION

In 1982, Daniel Anderson published his influential book, \"Wear Particle Atlas\", which describes, sizes, and classifies particles found in oil.

time-read
4 dak  |
March - April 2024