Engineers and audiophiles talk about the spectrum of sound as spanning 20Hz to 20,000Hz. That’s only partially correct. Most adults can’t hear above 14kHz. More importantly, humans in general don’t actually hear 20Hz very well either. But everyone—the deaf and hearing alike—can feel 120Hz and 20Hz, and even lower. In fact, hearing” deep bass is mostly feeling it.
Bass perception happens along an audio-tactile spectrum. The lowest notes are sensed primarily with the skin, and the highest primarily with the ear, but all of them are naturally perceived as a mix of both senses. That’s a big part of the reason why it is so hard to get that live sound” feeling with headphones—normal headphones can’t produce a critical aspect of the live experience.
Does frequency response down to 30Hz, 20Hz, and below matter? The answer is yes.” Rock, hip-hop, and EDM have huge amounts of energy at those levels.
Jazz and orchestral music, plus movies and games do, too. If you’ve never heard your favorite music on a system that can reproduce ALL the frequencies that are present in the recording, you will probably be shocked to learn how much you have been missing.
So how can you get deep bass? Producing low frequency acoustic sound at high volumes means moving a lot of air. A good home theater subwoofer can have drivers that are 15” or more in diameter. A PA system for a stadium concert can have hundreds of them.
When those giant speakers crank up, you don’t just hear them—you feel them. Your skin vibrates. Your organs vibrate. And for most people) your brain interprets that vibration as sound, even though it mostly isn’t being processed by what you normally think of as hearing.
Bu hikaye audioXpress dergisinin January 2023 sayısından alınmıştır.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber ? Giriş Yap
Bu hikaye audioXpress dergisinin January 2023 sayısından alınmıştır.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.
Already a subscriber? Giriş Yap
Perspectives on Automotive Sound Design - In the Era of Electric Vehicles
From combustion engine vehicles to fully electric vehicles, and from sound systems in the car to sound design and synthesis for the car itself, everything is changing in the automotive industry. This conversation with two members of the DSP Concepts automotive team with vast experience in the field, John Whitecar, VP of Product Management, and Steve Ernst, Head of Business Development, offers valuable insights on how things are evolving.
Audioscenic: From Vision to Product
Audioscenic is an innovative 3D audio beamforming technology company spun off from the University of Southampton. It is a remarkable example of perseverance, from early development to the first commercial implementation, which audioXpress considered Best of Show at CES 2023. This article shares the story so far, as Audioscenic continues its groundbreaking journey exploring consumer applications for its forward-thinking approach to spatial audio.
The Changing Audio-Ecosystem in Electric Vehicles
The rapid shift to plug-in hybrid and full-battery electric vehicles is having a significant and long-lasting impact on how audio systems are integrated into cars. While some noises are much more prominent due to the absence of the familiar engine noise, the transition offers exciting possibilities for sound systems, passenger entertainment, and enhancing the overall automotive experience.
A (Z)OTL with 300Bs: Part 1-The Makeover
Rebuilding an amplifier for reasons of better reliability, better aesthetics, or bringing it up to the latest standard can be very rewarding. And if it is a classical, technological grandstand, even more so. Thomas Perazella embarked on such an adventure with a famous David Berning ZOTL amplifier. In Part 1 of this article, Tom presents the amplifier and discusses its unique circuitry. In Part 2, he will proceed to dismantle and rebuild the amp for the new owner and place it in a new chassis
The Hypex NCORE NCx500 Amplifier Module
NCORE (NC) amplifier modules are the flagship product from Dutch manufacturer Hypex Electronics and its success among the high-end audio brands is well documented. In 2022, Hypex announced the introduction of its improved NCOREX technology, starting with the NCx500 OEM module, which audioXpress received for review
Monoblock Power Amplifier with Precision Bias Control
In Part 2, Bruce Gillingham discusses the remainder of the MB1's circuitry, its mechanical design, and its performance measurements
A Trip Down Memory Lane
The history of tube application began with radio receivers, the telephone system, and cinema sound systems. Later, tubes began to be used in home stereo systems, and in amplifiers for electric guitars. Today, the primary markets for tubes are high-end stereo and musical instrument amplifiers. In this article Richard Honeycutt remembers his first contact with \"starter\" guitar amps as a teenager, progressing throughout his days as a semi-pro musician
The Vanderveen Trans PP80 Valve Amplifier
This new push-pull (PP) valve amplifier, featuring the Trans technique, delivers 80W power, refined resolution, valve-sound envelopment, and low distortion plus good speaker damping. And... the amp is simple to construct
Accuracy in LTspice Modeling
Sometimes we need to consider the human factor when using circuit design simulation tools. In this article, our hollow-state expert details an error that occurred in a past article, which is now being corrected.
Transitioning Audio Tests from R&D to the Production Line
Production line audio testing poses many challenges such as noisy environments, harsh operating conditions, high throughput, relative limits, and more. In this article, Steve Temme shares his observations and outlines the main considerations to ensure a successful operation.
