Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics|September 2021
This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…
JEFF WARE
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

G’day. I’m not sure what part of the year you’ll read this over in Pom land, but it’s been freezing in the shed lately and I’ve had to run two heaters! I know it’s probably a laugh to you guys (a bit like when you say 35 degrees C is hot when to us that’s a nice mild day) but temperatures of between eight and 15 degrees C with chilly westerly winds is a bit much for us Aussies to deal with!

I was hoping to have a complete rebuilt motor by now but finding parts for the 1984 RG has proven harder than I imagined. In fact, there are less bits around than there were for the RZV500R or RG500, or even the TZR250 3MA! There is almost nothing left these days here in Australia and very little I can find overseas.

I’ve managed to get a mate on to it, Steve Cutting, of Steve Cutting Motorcycles, and he has managed to find most of what I need via Suzuki dealerships or in aftermarket version, but it’s been a six-week period of chasing parts. Crazy! Anyway, the cylinders are off getting rebored and the rest of the engine parts are on order so rather than sit around with the flies I decided to strip the rest of Bruno’s chassis.

هذه القصة مأخوذة من طبعة September 2021 من Classic Motorcycle Mechanics.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.

هذه القصة مأخوذة من طبعة September 2021 من Classic Motorcycle Mechanics.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.

المزيد من القصص من CLASSIC MOTORCYCLE MECHANICS مشاهدة الكل
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 mins  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 mins  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 mins  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 mins  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 mins  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 mins  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 mins  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 mins  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 mins  |
July 2021