Project Suzuki RG500 Part 6 - Rotary Club
Classic Motorcycle Mechanics|February 2019

He’s nearly there! Our Jeff sorts the rotary discs out on the square four and fires her up…

Jeff Ware
Project Suzuki RG500 Part 6 - Rotary Club

G’day! Well I trust you’ve had a good month or so.I’ve been flat stick on the RG500 as the local postman greeted the kids at our mailbox with some RG goodies a few times. Incidentally, our postman is a cool guy, he rides a mint RG400 and drives an AC Cobra and is from your land! We talk bikes a lot if I see him out the front delivering the post. Bikes are a great leveller eh? So, my rotary discs arrived along with associated O-rings and gaskets and some other bits and I got to work. Before fitting the new rotary valves I removed and cleaned the exhaust power valves. Now, this was a simple task on cylinders one, three and four but cylinder two (front right-hand) proved to be a bit a bugger.

In fact, thanks to just 3mm lack of clearance between the valve housing and the frame engine cradle, I had to drop the engine from its mounts and rotate it back 5mm! What a pain in the ass! Of course, I had already painted and re-fitted the front exhaust pipes as luck would have it… Anyway, it’s done for another 3000-miles.

هذه القصة مأخوذة من طبعة February 2019 من Classic Motorcycle Mechanics.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.

هذه القصة مأخوذة من طبعة February 2019 من Classic Motorcycle Mechanics.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.

المزيد من القصص من CLASSIC MOTORCYCLE MECHANICS مشاهدة الكل
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 mins  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 mins  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 mins  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 mins  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 mins  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 mins  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 mins  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 mins  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 mins  |
July 2021