Ford 429 and 460 blocks share the same 4.36-inch bore diameter but juggled stroke to get 429 (3.59-inch stroke) or 460 (3.85-inch stroke) cubic inches. Any healthy 429 or 460 block can be made into our 501 with a 0.0305-inch overbore and 4.3905-inch bore diameter. That said, be aware that Ford 429/460 blocks come in three different deck heights: 10.3000 (1968–1970½), 10.3100 (1970½–1971) and 10.322 (1972-up). Each subsequent deck height increase lowered compression by roughly ½ point as Ford entered the smoggy ’70s. Be sure you know which deck you’ve got before ordering parts to avoid piston-to-head contact and unwanted compression ratio errors. Our 1971 block has the 10.3100-inch deck height which was machined 0.010 inch.
Thanks to the fact Ford started stuffing 460s into pickup trucks and Lincoln luxury barges in the smog-’70s, there are millions of available core engines out there just waiting to be poked and stroked into top-notch street and strip performers. And thanks to Edelbrock’s Power Package Top End kit, the usual guesswork associated with selecting the right combination of heads, cam, and induction has been eliminated. Let’s watch as Donnie Wood and Steve Chmura of R.A.D. Auto Machine transform a 460 into a stump-pulling 501ci stroker with over 500 lb-ft of torque from 2,300 to 5,300 rpm.
And thanks to the substitution of the heavy cast-iron heads and manifold with light aluminum, the end result weighs about the same as an all-iron 351, so it won’t hinder rearward weight transfer onto the slicks, or sink the front axle into the mud, as the case may be!
هذه القصة مأخوذة من طبعة June 2020 من Hot Rod.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك ? تسجيل الدخول
هذه القصة مأخوذة من طبعة June 2020 من Hot Rod.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك? تسجيل الدخول
What Is Pro Street?
You know it when you see it.
Pro Street in Pure Vision
Builder Steve Strope weighs in on the Pro Street look and what he would build today.
THE GAS ERA LIVES ON
These vintage race cars chart the evolution of technology in the early days of drag racing.
MOTOR HEAD FOR LIFE
Scott Sullivan is one of the original Pro Street pioneers. He still builds cars today out of a small shop in Dayton, Ohio.
BRINGING BACK PRO STREET!
David Freiburger and Roadkill Garage built a Pro Street Nova.
SWEET ASPIRATIONS
Jerry and Matthew Sweet added an 800ci Pro Stock mountain motor to chase HOT ROD Drag Week's Pro Street NA Record.
Making Bad Decisions Badder
Bradley Gray's 1970 Nova is a Hybrid! It's a streetable Funny Car.
ART PROJECT
This Rad Rides by Troy-built '63 split-window Corvette went from restaurant prop to ripping up the street!
WHERE DO WE GO FROM HERE?
THE PRO STREET ERA PEAKED IN THE '80S. ARE WE IN THE BEGINNING OF A RESURGENCE?
Making Connections
Project T-top Coupe: We install a Terminator X Max for big power.