Before the 1930s, it was common for full-size aircraft to feature various forms of rigging wires and support struts to maintain structural integrity. Today, rigging is more commonly found in both experimental class homebuilt planes and light aircraft. This feature has also transitioned into the scale RC world, and chances are that if the full-size aircraft needed them, so does your model! Let’s look at a few examples.
There are conventional high-wing airplanes like the Piper J-3 Cub and Pilatus Porter, where struts are used to connect the wing to the fuselage, and all for good reason. Without the wing struts, the wing can break off in flight. In the case of biplanes, interplane struts are designed to attach the upper wing to the lower wing; they are often located close to the outer wing panels. Then, the cabane struts connect the upper wing to the fuselage and the wing rigging (often referred to as “flying wires”), and are used to increase strength and tie the wings to one another as well as to the fuselage.
UNDERSTANDING AIRCRAFT FORCES
هذه القصة مأخوذة من طبعة April 2020 من Model Airplane News.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك ? تسجيل الدخول
هذه القصة مأخوذة من طبعة April 2020 من Model Airplane News.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك? تسجيل الدخول
Legend Hobby / Seagull Models - Cessna Grand Caravan 208
The Cessna Grand Caravan 208 is a legend in aviation circles. A single engine utility aircraft that punches up with capabilities that rival many twin engine aircraft in its class. Its seemingly simple configuration belies its near extreme utility.
PROPER CG LOCATION FOR AEROBATICS
If you are getting into aerobatics and are starting to perform more advanced maneuvers, it is time to discuss ways you can not only become a better pilot, but how you can also improve the flight characteristics of your airplanes.
Legend Hobby 13-Foot L-19 Bird Dog/ Cessna O-1
This famous multi-mission single engine observation aircraft served from 1950-1974. From calling out target locations to providing intel/recon information, the Bird Dog was a valued asset in both the Korean War and Vietnam.
EARN YOUR WINGS
10 Tips for First-Flight Success
Old School Model Works Fifty Six
The Fifty Six takes its design cues from the original .09- to .15-size Carl Goldberg Falcon 56 of the 1960s. Reworked to incorporate modern, lasercut techniques to make kit building better than ever.
FLYING TWINS Multi-engine warbirds made easy
Let’s face it, there’s just something extra special about twin-engine RC aircraft. Most modelers stop what they’re doing when a twin fires up on the flightline.
HOW TO BALANCE PROPELLERS
Four easy steps to increase performance and reduce vibration
PRODUCT REVIEW: RC PLANE STANDS BENCHTOP MODEL
I’m a sucker for shop stuff. I buy tools I will probably never use just because they are cool, or I might need to use them someday. When Glen from RC Plane Stands reached out about a review, however, I knew as soon as I browsed their website that I would be receiving something I would use a lot, maybe even daily.
SPIRIT OF RHINEBECK AWARD WINNER
A close up of Norman Malinowski’s 1/3-scale Albatros
CENTER OF GRAVITY BASICS
The secret to a plane that flies well
