The more and more I get wrapped up in the milling, logging, and lumber industry, the more and more questions I seem to get about chainsaw mills. What are my thoughts on them? Are they worth the cost? Will they produce good, usable material? So, out with the chainsaw, fuel cans, and some long johns to answer these questions.
Chainsaw Mill Basics
A chainsaw mill, obviously, utilizes a chainsaw powerhead and bar to rip logs into usable pieces. One of the most common setups, designed and sold by Granberg, is shown below. Commonly referred to as an "Alaskan mill" (which is a trademark name owned by Granberg), it's a fixture that captures the chainsaw bar under a pair of guide rails. The guide rails can be adjusted to make different-sized cuts when milling a log.
One of the most common questions when it comes to chainsaw mills is "will my current saw work?". And the answer is... maybe. For chainsaw milling operations, you need a saw with a minimum of about 70cc. At 70cc, you're starting to get into the professional saw category, and that's a good thing, as professional saws are generally built better than "homeowner" saws. And, I want to be clear: milling can be hard on saws. In fact, most saw manufacturers don't recommend milling with their saws. But, when it comes to milling, the bigger the powerhead, the better. Here, we're using a Stihl MS880, which is the biggest saw they currently make. If more power is needed, then you start to get into the realm of double-headed bars (yes, two saw heads on a bar is a thing). However, that only makes sense if you're cutting logs over 60"-wide.
هذه القصة مأخوذة من طبعة August 2022 - Issue 266 من Popular Woodworking.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك ? تسجيل الدخول
هذه القصة مأخوذة من طبعة August 2022 - Issue 266 من Popular Woodworking.
ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 9,000 مجلة وصحيفة.
بالفعل مشترك? تسجيل الدخول
Ironbark Toolworks
Devon Campbell is designing and building world-class tools from his shop in Queensland.
Fern Stand
This Charles Limbert table was sold as a fern stand, but it's a great addition to any home.
Norwegian Linen Chest
This small linen chest can be made in batches, and the lid presents some fun challenges during the process.
Bent Lamination Headphone Stand
Practice some mass-assembly techniques to create this elegant stand.
All About PPE
Safety is #1 in the workshop.
Joinery Machines
Joinery machines are much more than one-trick ponies. Here's an intro, and why you should consider adding one in your shop.
Linseed Paints
Linseed paint will change the way you approach painting a project, but this wonderful finish takes a different approach than modern paints.
BauBuche
This laminated material comes from Germany, and is made of hundreds of layers of European beech.
Square Platter with Textured Rim
Adding a bit of texture and colour to a square platter is a great way to dress up a simple design.
Excedo Side Table
With one board, you can put together this side table that packs in a bunch of great woodworking techniques.