Peter Shaw does some practical experimenting in his workshop.
Many years ago, shortly after I became involved in this hobby, I read something about re-using old, worn-out files to make lathe tools. This I found intriguing, and did indeed attempt to make such a tool. It was a total failure! Nevertheless, I kept the idea in mind, and when some years later I had need of a replacement parting-off tool, I resurrected the idea with eventual success, but only after attempting an impossibly long blade.
Over the next few years, I picked up other hints & tips, some of which did not work for me, whilst others did indeed work but with a few provisos, and I now have five tools made from old files plus a quantity of spare sections for use later if required. This article is a discussion of what I found worked, and just as importantly, did not work.
Successful tools
At the extreme left of photo 1 is a parting- off tool made from a 4in x ½ inch x 1/8 inch file which works very well indeed provided the cut is flooded with cutting fluid and the tool is used firmly, i.e. no “tickling” of the work, otherwise chatter results. The actual blade itself has a tip width of 1.84mm and is about 10mm long. The holder for this tool is similar to that shown on page 21 of L. C. Mason’s book, Using the Small Lathe, albeit with a channel the same width as the height of the file. The tool is thus held rigidly whilst cutting.
Diese Geschichte stammt aus der April 2017-Ausgabe von Model Engineers' Workshop.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent ? Anmelden
Diese Geschichte stammt aus der April 2017-Ausgabe von Model Engineers' Workshop.
Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.
Bereits Abonnent? Anmelden
Readers' Workshops - Patrick Cubbon
Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation
Desktop Gear Hobbing
Toby Kinsey has designed this fascinating piece of gearmaking equipment
The John Stevenson Trophy 2020
Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.
From the Archives: Twist drill Sharpening by the Four Facet Method
Giles Parkes, MEW Issue 64, February/March 2000
Dividing on the Warco 220 Lathe
Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines
Choosing Steels
Stub Mandrel offers some advice on choosing the right steel for the job
A Storage Story
Robin King shares the lessons learned from his experience of workshop moves
A Simple Drill Grinding Aid
A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him
Yet Another Bodge-Up!
Peter Shaw finds a use for some aged homebrew slot drills.
Workshop Press Tooling Part 2
Will Doggett makes a set of tooling for his press tool described starting in issue 285