Project Suzuki TR750 part 6: Exhausting times!
Classic Motorcycle Mechanics|December 2020
The crowning glory of any ‘special’ two-stroke has to be the expansion chambers, right?
MALC SHAW
Project Suzuki TR750 part 6: Exhausting times!

What defines a Suzuki TR 750? To my mind there are two visual components that are iconic to that bike: the ‘duck tail’ seat and the through-the frame expansion chambers. Both make it instantly recognisable, without those it could be just another bike.

So, the die was cast, my CMR TR had to have them. In the words of Dirty Harry, ‘A man’s got to know his limitations.’ My limitation is simple. There is not any way I could build expansion chambers that would work, do what I wanted or even look good. There are a few companies out there that are building expansion chambers, but they are generally for standard bikes to retrofit. Dave Swarbrick does a kit for the TR, but at the time of contacting these were mild steel and I wanted the ‘race’ look of welded stainless. It was clear that the way forward was to have the exhausts hand-built.

In part five I think I had got most of the components fitted and a few problems addressed that would allow the construction of the exhausts as the next part of the build. Radiator, chain-run, foot-peg height, clearance through in the frame, etc., I now hoped these parts all provided established parameters to enable the exhausts to thread their way around the bike, as mistakes at this juncture were going to be painful and expensive to rectify if wrong in the future.

Esta historia es de la edición December 2020 de Classic Motorcycle Mechanics.

Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.

Esta historia es de la edición December 2020 de Classic Motorcycle Mechanics.

Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.

MÁS HISTORIAS DE CLASSIC MOTORCYCLE MECHANICSVer todo
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 minutos  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 minutos  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 minutos  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 minutos  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 minutos  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 minutos  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 minutos  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 minutos  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 minutos  |
July 2021