Shed Scrambler!
Classic Motorcycle Mechanics|October 2020
CMM reader Andy Taylor’s wife gladly handed over her potting shed for the build of ‘her’ Kawasaki Z400-based Street Scrambler!
ANDY TAYLOR
Shed Scrambler!

I bought this Kawasaki Z400 as as top-gap, because I was so despondent having seized up my Yamaha R3.5 Special (see CMM April 2015).

It was supposed to be a quick custom project, but I wasn’t sure on which direction I was taking it. A set of modern Triumph Scrambler exhausts appeared on eBay which I bought and I decided that if I could make them fit, that would confirm the destiny of the build – and so it started!

The engine sounded fine with no knocks or rattles, so after I checked it over I just had to re-set the valve clearances and fit new points and condensers – nothing else needed to be done, which was a right result. A mate of mine polished the engine in part exchange for previous work I had done for him on one of his bikes.

I stripped the bike of all the parts that I wasn’t going to use and started with making the Triumph pipes fit. This took many hours of cutting and welding to get the standard headers to work, but the pipes then covered the kick-start so I had to reduce that by about 50mm. I then cut the silencers in half, removed the catalytic converters, then shortened the silencers by about 75mm. The guards were also reduced in length and to save having them being re-chromed I welded stainless cover strips over the joints. I found some moto-cross style foot-rests in the garage, which I managed to fit to the original hangers with a bit of modification and made a moto-cross style gear-lever. I then bought a pair of old Triumph-style stainless mudguards off good ol’ eBay.

Esta historia es de la edición October 2020 de Classic Motorcycle Mechanics.

Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.

Esta historia es de la edición October 2020 de Classic Motorcycle Mechanics.

Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.

MÁS HISTORIAS DE CLASSIC MOTORCYCLE MECHANICSVer todo
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 minutos  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 minutos  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 minutos  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 minutos  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 minutos  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 minutos  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 minutos  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 minutos  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 minutos  |
July 2021