Top-end stuff!
Classic Motorcycle Mechanics|September 2020
With all the lockdown nonsense, it’s time for Allen to get on with the motor build of his splendid Kawasaki Super Six.
Allen Millyard
Top-end stuff!

With the current lockdown related a bit it was really nice to be able to go out for a ride on a few of my bikes, especially my Z1 Super Six. I started by riding it on short trips local to home. I always put the engine through many heat cycles from cold to hot to help the welded cases and other parts normalise and settle down as part of commissioning the bike.

After about 100 miles I removed the tank and tightened the cylinder head nuts, which is an easy job on the Z1 engine because they are all accessible with the cam-cover in place. While the tank was off I checked the throttle linkage on the carbs to see if anything had come loose. There was a slight lumpiness on light throttle openings and a bit of popping in the exhaust at idle; it felt like one cylinder was missing or not running at all. When the throttle was opened past a quarter of a turn it seemed to chime in and run smoothly. The throttle linkage was fine so maybe it could be a blocked pilot jet on one cylinder. I checked the header pipe temperatures with my optical thermometer and header three was much cooler, then the other five. It is possible to remove the float bowls from the carbs while the carbs are mounted on the bike, so I removed number three. It was full of petrol so there was not a flow issue. I then removed the pilot jet and looked up through it at a light and it was definitely blocked. A quick blast with my air-line removed the obstruction.

Esta historia es de la edición September 2020 de Classic Motorcycle Mechanics.

Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.

Esta historia es de la edición September 2020 de Classic Motorcycle Mechanics.

Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.

MÁS HISTORIAS DE CLASSIC MOTORCYCLE MECHANICSVer todo
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 minutos  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 minutos  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 minutos  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 minutos  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 minutos  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 minutos  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 minutos  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 minutos  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 minutos  |
July 2021