Recently, we caught up with Paul to chat about his B-25 back story. Here’s what he told us.
Model Airplane News: Paul, we’re always impressed when you wheel out your B-25. Tell more about your monstrous Mitchell bomber.
Paul LeTourneau: I built the B25 back in the winter of 20022003, and it first flew in 2003. It took 7 months to build it and back then I had painted it in a drone director scheme. I started the project by enlarging a set of Nick Ziroli plans from its original 101-inch span to 160-inches. This brought the B-25 to 1/5-scale, and I used typical balsa and plywood construction, but all the hardware used was super-sized. The outer wing panels have strong aluminum carry-through tube spars and they plug into the wing center section, which incorporates the engine nacelles and main landing gear.
What about the finish?
Paul: After much sanding and filling and more sanding, I used 1/2oz. fiberglass cloth and two coats of Zap Finishing Resin. After stripping off the original paint scheme, (back in 2013 I think), I recovered the airframe panel by panel with adhesive backed aluminum tape from McMaster Carr. All the panel lines are reproduced and the flush rivet details are included. After the aircraft’s vinyl markings were added, I applied a clear over coat to seal everything up. I made all my own mold parts for the canopy, bombardier’s nose section and turrets, and the fiberglass engine cowls and gun blisters.
What about engine and radio gear?
Esta historia es de la edición November 2020 de Model Airplane News.
Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.
Ya eres suscriptor ? Conectar
Esta historia es de la edición November 2020 de Model Airplane News.
Comience su prueba gratuita de Magzter GOLD de 7 días para acceder a miles de historias premium seleccionadas y a más de 9,000 revistas y periódicos.
Ya eres suscriptor? Conectar
Legend Hobby / Seagull Models - Cessna Grand Caravan 208
The Cessna Grand Caravan 208 is a legend in aviation circles. A single engine utility aircraft that punches up with capabilities that rival many twin engine aircraft in its class. Its seemingly simple configuration belies its near extreme utility.
PROPER CG LOCATION FOR AEROBATICS
If you are getting into aerobatics and are starting to perform more advanced maneuvers, it is time to discuss ways you can not only become a better pilot, but how you can also improve the flight characteristics of your airplanes.
Legend Hobby 13-Foot L-19 Bird Dog/ Cessna O-1
This famous multi-mission single engine observation aircraft served from 1950-1974. From calling out target locations to providing intel/recon information, the Bird Dog was a valued asset in both the Korean War and Vietnam.
EARN YOUR WINGS
10 Tips for First-Flight Success
Old School Model Works Fifty Six
The Fifty Six takes its design cues from the original .09- to .15-size Carl Goldberg Falcon 56 of the 1960s. Reworked to incorporate modern, lasercut techniques to make kit building better than ever.
FLYING TWINS Multi-engine warbirds made easy
Let’s face it, there’s just something extra special about twin-engine RC aircraft. Most modelers stop what they’re doing when a twin fires up on the flightline.
HOW TO BALANCE PROPELLERS
Four easy steps to increase performance and reduce vibration
PRODUCT REVIEW: RC PLANE STANDS BENCHTOP MODEL
I’m a sucker for shop stuff. I buy tools I will probably never use just because they are cool, or I might need to use them someday. When Glen from RC Plane Stands reached out about a review, however, I knew as soon as I browsed their website that I would be receiving something I would use a lot, maybe even daily.
SPIRIT OF RHINEBECK AWARD WINNER
A close up of Norman Malinowski’s 1/3-scale Albatros
CENTER OF GRAVITY BASICS
The secret to a plane that flies well
